Draft production prep · R01 · 16 October 2026
Crown Landmark
Coordinate a bounded review of the issued exterior/interior packs and C01 candidate, preserving all source artwork and room layout while preparing explicit shell-fit decisions.
Current R02 scope requires a complete usable asset package. Design and isolated authoring can proceed; proposed dimensions, shell selection, site placement and actual engine checks retain explicit evidence status.
Current production program · R02
Exterior, usable spaces and a complete handoff.
Support Quik’s Crown Landmark start with existing exterior/interior work, resolved selected-room fit, and atlas scene staging.
Required spaces
- Existing ground arrival lobby and core route
- Existing L25 council / vote, waiting, celebration and corridor suite
- Existing L26 diplomacy / private lounge, breakfast, office and records suite
Required exterior coverage
- Full-building hero / silhouette
- Opposite or rear side
- Entrance at player-eye level
- Defining detail / building-to-ground interface
Required interior coverage
- Lobby wide and reverse / exit view
- Selected room 1 wide and reverse
- Selected room 2 wide and reverse, when commissioned
Delivery state: Scoped — complete design: not yet evidenced; reviewed build packet: not yet evidenced; engine verification: not yet evidenced.
Audited source baseline: EXT R06 and INT R02 retained. C02 and all81 room-fit measurements merged in PR45. C02:75 fit,5 below proposed1.2m allowance,1 outside wall/deck; all32 upper rooms fit. Shell choice, lower conflicts and actual engine evidence remain open.
Owner: Quik + CLAUDE2; OA1 atlas / review coordination · Independent reviewer: OA1-assigned independent read-only reviewer
Five-seat production plan and kickoff briefs → · Full current scope → · Download all31 programs
R02 supersedes conflicting shell-only or deferred-interior recommendations in the earlier preparation records below. Proposed room uses do not create new story canon; references do not establish completed geometry.
Latest Blender delivery · C03_r9
Crown Landmark · C03 Round 9
Quik’s latest five-module Crown Landmark exterior, with corrected mesh counts, QA reports, frozen Round 4 sources and its formal room-fit results.
Proposed exterior candidate · C03_r9 QA reported; room fit pending · Unreal not tested.
Prepare now
- Hash and inspect the existing C01 candidate, R06 source, INT R02 layout, and independent fit audit without modifying any of them.
- Prepare a review packet for the existing L25/L26 overlays and named C01/R06 views, with fit limits and open decisions clearly separated.

Reference / candidate
Compare the intent and the model.
Separate evidence types, shown together. Perspective images are not calibrated measurements.
Actual geometry / C01
One model. Every side.
These are saved renders of the supplied editable mesh. Exterior character and room fit remain in review.
Coordination R01 / L25 + L26
Keep the room plans in view.
These existing coordination diagrams predate C01. They do not show measured C01 skin sections; use the separate C01 fit findings for its three L26 allowance conflicts.
Preparation / not geometry
What Quik will build and review.
Component labels come from this asset’s prep record. This board is a task map, not a dimensional drawing.
- 01R06 exterior target envelopesource record
- 02Six principal ribs and podiumsource record
- 03L25 council and L26 diplomacy planning zonessource record
- 04Arrival, core, atrium and circulationsource record
Modeling sequence
- 01Freeze source baselineReview must identify the exact unchanged candidate and source inputs before interpreting fit.
- 02Compare C01 with R06 authorityReport target checks separately from visual-design acceptance; 02_Rear remains the rear authority.
- 03Reconcile INT R02 fit findingsLegend selects any revision direction; a limited rectangle audit is not furnished, rib, access, or engine acceptance.
- 04Prepare a scoped revision decisionNo changes to C01, room layout, design approvals, or construction hold without explicit review.
- 05Return review evidenceSeparate creator visual review, shell acceptance, placement and engine acceptance.
Planned review views
Components & scope evidence
Scope basis: P0; proposed Tier E. EXT R06 and INT R02 are issued; the register marks the shell pending and the L18/L19 host assignment proposed. C01 is an editable review candidate with an independent fit audit, not a design, shell, placement, or engine approval.
Modeling sequence & review views
Freeze source baseline
Record hashes/revisions for R06, INT R02, the C01 GLB/OBJ and its fit report; leave C01, source rooms, approvals and hold status unchanged.
Gate: Review must identify the exact unchanged candidate and source inputs before interpreting fit.
- production/assets/buildings/PI-BLD-0001-V01/EXT/R06/04_Handoff/MODELING_BRIEF.txt
- production/assets/buildings/PI-BLD-0001-V01/EXT/R06/05_ScaleAndPlan/PI-BLD-0001-V01_CrownLandmark_EXT_R06_DesignTargets.json
- production/assets/buildings/PI-BLD-0001-V01/INT/R02/06_Handoff/EditableLayout/INTERIOR_LAYOUT.json
- production/assets/buildings/PI-BLD-0001-V01/INT/R02/06_Handoff/MODELING_BRIEF.txt
- production/handoffs/quik/2026-10-16/crown-landmark/SHELL-C01/MODEL/FIT_REVIEW.json
- production/handoffs/quik/2026-10-16/crown-landmark/SHELL-C01/MODEL/PI-BLD-0001-V01_CrownLandmark_SHELL_C01.glb (GLB not served on the website; the original model is preserved in the project)
- production/handoffs/quik/2026-10-16/crown-landmark/SHELL-C01/MODEL/PI-BLD-0001-V01_CrownLandmark_SHELL_C01.obj
- production/handoffs/quik/2026-10-16/crown-landmark/SHELL-C01/README.md
Compare C01 with R06 authority
Use named front, rear and overhead views from the same C01 mesh. Treat artwork comparison as qualitative because camera calibration is not established; use R06 authored targets only for the dimensions explicitly supplied there.
Gate: Report target checks separately from visual-design acceptance; 02_Rear remains the rear authority.
- production/assets/buildings/PI-BLD-0001-V01/EXT/R06/01_Master/PI-BLD-0001-V01_CrownLandmark_EXT_R06_Master_Tall.jpeg
- production/assets/buildings/PI-BLD-0001-V01/EXT/R06/03_IndividualViews/PI-BLD-0001-V01_CrownLandmark_EXT_R06_01_Front.png
- production/assets/buildings/PI-BLD-0001-V01/EXT/R06/03_IndividualViews/PI-BLD-0001-V01_CrownLandmark_EXT_R06_02_Rear.png
- production/assets/buildings/PI-BLD-0001-V01/EXT/R06/04_Handoff/MODELING_BRIEF.txt
- production/assets/buildings/PI-BLD-0001-V01/EXT/R06/05_ScaleAndPlan/PI-BLD-0001-V01_CrownLandmark_EXT_R06_13_RoofFootprintPlan.png
- production/assets/buildings/PI-BLD-0001-V01/EXT/R06/05_ScaleAndPlan/PI-BLD-0001-V01_CrownLandmark_EXT_R06_DesignTargets.json
- production/handoffs/quik/2026-10-16/crown-landmark/SHELL-C01/MODEL/FIT_REVIEW.json
- production/handoffs/quik/2026-10-16/crown-landmark/SHELL-C01/MODEL/VIEWS/C01_front.png
- production/handoffs/quik/2026-10-16/crown-landmark/SHELL-C01/MODEL/VIEWS/C01_rear.png
- production/handoffs/quik/2026-10-16/crown-landmark/SHELL-C01/MODEL/VIEWS/C01_top.png
Reconcile INT R02 fit findings
Review the reported L25/L26 planning-zone containment and exact L26 flags against the unchanged INT R02 source, then list envelope/recess/structure and layout options without editing either source.
Gate: Legend selects any revision direction; a limited rectangle audit is not furnished, rib, access, or engine acceptance.
- production/assets/buildings/PI-BLD-0001-V01/INT/R02/06_Handoff/EditableLayout/INTERIOR_LAYOUT.json
- production/assets/buildings/PI-BLD-0001-V01/INT/R02/06_Handoff/MODELING_BRIEF.txt
- production/handoffs/quik/2026-10-16/crown-landmark/R01/COORDINATION/SPATIAL_REVIEW/L25_Fit_Review.png
- production/handoffs/quik/2026-10-16/crown-landmark/R01/COORDINATION/SPATIAL_REVIEW/L26_Fit_Review.png
- production/handoffs/quik/2026-10-16/crown-landmark/SHELL-C01/MODEL/FIT_REVIEW.json
Prepare a scoped revision decision
If requested, write a change-impact list for envelope, room zones, access, sightlines, and reusable components; do not implement changes under this prep record.
Gate: No changes to C01, room layout, design approvals, or construction hold without explicit review.
- production/assets/buildings/PI-BLD-0001-V01/EXT/R06/04_Handoff/MODELING_BRIEF.txt
- production/assets/buildings/PI-BLD-0001-V01/INT/R02/06_Handoff/MODELING_BRIEF.txt
- production/handoffs/quik/2026-10-16/crown-landmark/SHELL-C01/MODEL/FIT_REVIEW.json
- production/handoffs/quik/2026-10-16/crown-landmark/SHELL-C01/README.md
Return review evidence
Return source hashes, named-view comparisons, audit limitations, unresolved decisions and the exact candidate revision. Keep placement, UE import, collision, and runtime claims open.
Gate: Separate creator visual review, shell acceptance, placement and engine acceptance.
- production/handoffs/quik/2026-10-16/crown-landmark/SHELL-C01/MODEL/FIT_REVIEW.json
- production/handoffs/quik/2026-10-16/crown-landmark/SHELL-C01/MODEL/MODEL_MEASUREMENTS.json
- production/handoffs/quik/2026-10-16/crown-landmark/SHELL-C01/MODEL_SPEC.json
- production/handoffs/quik/2026-10-16/crown-landmark/SHELL-C01/README.md
- production/protocols/building/R05/GUIDE.md
Required review views
C01 front against R06 master/front
Review broad silhouette and entrance qualitatively from the same candidate mesh; do not claim pixel-calibrated dimensional agreement.
- production/assets/buildings/PI-BLD-0001-V01/EXT/R06/01_Master/PI-BLD-0001-V01_CrownLandmark_EXT_R06_Master_Tall.jpeg
- production/assets/buildings/PI-BLD-0001-V01/EXT/R06/03_IndividualViews/PI-BLD-0001-V01_CrownLandmark_EXT_R06_01_Front.png
- production/handoffs/quik/2026-10-16/crown-landmark/SHELL-C01/MODEL/FIT_REVIEW.json
- production/handoffs/quik/2026-10-16/crown-landmark/SHELL-C01/MODEL/VIEWS/C01_front.png
C01 rear against R06 02_Rear
Check the controlling crossed-gold rear treatment and record differences without substituting the secondary B02 comparison.
- production/assets/buildings/PI-BLD-0001-V01/EXT/R06/03_IndividualViews/PI-BLD-0001-V01_CrownLandmark_EXT_R06_02_Rear.png
- production/assets/buildings/PI-BLD-0001-V01/EXT/R06/04_Handoff/MODELING_BRIEF.txt
- production/handoffs/quik/2026-10-16/crown-landmark/SHELL-C01/MODEL/VIEWS/C01_rear.png
True overhead footprint
Compare C01 top view to the R06 roof-footprint schematic; distinguish the authored target from unapproved shell acceptance.
- production/assets/buildings/PI-BLD-0001-V01/EXT/R06/05_ScaleAndPlan/PI-BLD-0001-V01_CrownLandmark_EXT_R06_13_RoofFootprintPlan.png
- production/assets/buildings/PI-BLD-0001-V01/EXT/R06/05_ScaleAndPlan/PI-BLD-0001-V01_CrownLandmark_EXT_R06_DesignTargets.json
- production/handoffs/quik/2026-10-16/crown-landmark/SHELL-C01/MODEL/FIT_REVIEW.json
- production/handoffs/quik/2026-10-16/crown-landmark/SHELL-C01/MODEL/VIEWS/C01_top.png
L25 and L26 source-zone fit review
Inspect existing overlays and the exact audit flags, keeping the interior source rectangles unchanged pending a decision.
- production/assets/buildings/PI-BLD-0001-V01/INT/R02/06_Handoff/EditableLayout/INTERIOR_LAYOUT.json
- production/handoffs/quik/2026-10-16/crown-landmark/R01/COORDINATION/SPATIAL_REVIEW/L25_Fit_Review.png
- production/handoffs/quik/2026-10-16/crown-landmark/R01/COORDINATION/SPATIAL_REVIEW/L26_Fit_Review.png
- production/handoffs/quik/2026-10-16/crown-landmark/SHELL-C01/MODEL/FIT_REVIEW.json
C01 elevated/side views
Review candidate crown, rib, podium and envelope interpretations before deciding whether a new candidate revision is needed.
- production/assets/buildings/PI-BLD-0001-V01/EXT/R06/04_Handoff/MODELING_BRIEF.txt
- production/handoffs/quik/2026-10-16/crown-landmark/SHELL-C01/MODEL/VIEWS/C01_elevated.png
- production/handoffs/quik/2026-10-16/crown-landmark/SHELL-C01/MODEL_SPEC.json
- production/handoffs/quik/2026-10-16/crown-landmark/SHELL-C01/README.md
Shared kits & asset dependencies
Decision queue & Friday return
Should C01 remain a review candidate as modeled, or should an explicitly scoped new exterior candidate address named qualitative mismatches?
Owner: Legend. Resolution evidence: Recorded creator review against R06 master/front/02_Rear and documented change-impact list; C01 itself is not approval.
- production/assets/buildings/PI-BLD-0001-V01/EXT/R06/04_Handoff/MODELING_BRIEF.txt
- production/handoffs/quik/2026-10-16/crown-landmark/SHELL-C01/MODEL/FIT_REVIEW.json
- production/handoffs/quik/2026-10-16/crown-landmark/SHELL-C01/README.md
How should the three flagged L26 planning rectangles be reconciled with the candidate shell/recess/structure while preserving the INT R02 layout until a decision?
Owner: Legend with layout author; Quik supplies candidate measurements. Resolution evidence: Joint review of unchanged INT R02 layout, C01 section evidence, and an approved revision instruction if any.
- production/assets/buildings/PI-BLD-0001-V01/INT/R02/06_Handoff/EditableLayout/INTERIOR_LAYOUT.json
- production/assets/buildings/PI-BLD-0001-V01/INT/R02/06_Handoff/MODELING_BRIEF.txt
- production/handoffs/quik/2026-10-16/crown-landmark/R01/COORDINATION/SPATIAL_REVIEW/L26_Fit_Review.png
- production/handoffs/quik/2026-10-16/crown-landmark/SHELL-C01/MODEL/FIT_REVIEW.json
Which selected-room routes and rooms are required in the first shell-fit sample, including independent L26 access?
Owner: Legend. Resolution evidence: A scoped enterability decision linked to the existing room/access plan and a reviewed route/clearance plan.
- production/assets/buildings/PI-BLD-0001-V01/INT/R02/06_Handoff/EditableLayout/INTERIOR_LAYOUT.json
- production/assets/buildings/PI-BLD-0001-V01/INT/R02/06_Handoff/MODELING_BRIEF.txt
- production/protocols/building/R05/GUIDE.md
What exact project branch/map and UE checks will establish later engine evidence for this candidate?
Owner: Quik. Resolution evidence: Current-project report naming branch/commit, engine version, map, measured import state, and separately scoped runtime tests.
- docs/current-decisions.md
- production/protocols/building/R05/GUIDE.md
- production/world/SCALE_REGISTER.md
Friday: requires decision
- Legend direction on C01 visual deviations and any new candidate revision.
- A jointly reviewed response to the L26 perimeter findings; no room-layout or C01 edits under this prep record.
- Quik project/branch/map evidence and any engine execution plan; this prep does not lift the construction hold.
Friday: return evidence
- Exact model/source hashes and rerun fit-audit output if independently reproduced.
- Annotated R06/C01 comparisons and L25/L26 fit issue list that preserves the audit limitations.
- Any approved follow-up instruction as a separate revision/task; no shell, placement, or engine-ready claim.
Downloads & source inventory
README and JSON retain repository-relative source paths. Use the linked inventory here when reviewing downloaded copies.
Review the existing Crown exterior C01 model and fit conflicts → Readiness report: all 81 rooms measured → Exterior candidate C02 →
Source inventory
- docs/current-decisions.md
- production/assets/buildings/PI-BLD-0001-V01/EXT/R06/01_Master/PI-BLD-0001-V01_CrownLandmark_EXT_R06_Master_Tall.jpeg
- production/assets/buildings/PI-BLD-0001-V01/EXT/R06/03_IndividualViews/PI-BLD-0001-V01_CrownLandmark_EXT_R06_01_Front.png
- production/assets/buildings/PI-BLD-0001-V01/EXT/R06/03_IndividualViews/PI-BLD-0001-V01_CrownLandmark_EXT_R06_02_Rear.png
- production/assets/buildings/PI-BLD-0001-V01/EXT/R06/04_Handoff/MODELING_BRIEF.txt
- production/assets/buildings/PI-BLD-0001-V01/EXT/R06/05_ScaleAndPlan/PI-BLD-0001-V01_CrownLandmark_EXT_R06_13_RoofFootprintPlan.png
- production/assets/buildings/PI-BLD-0001-V01/EXT/R06/05_ScaleAndPlan/PI-BLD-0001-V01_CrownLandmark_EXT_R06_DesignTargets.json
- production/assets/buildings/PI-BLD-0001-V01/INT/R02/06_Handoff/EditableLayout/INTERIOR_LAYOUT.json
- production/assets/buildings/PI-BLD-0001-V01/INT/R02/06_Handoff/MODELING_BRIEF.txt
- production/districts/D02-CrownKey/planning/BUILD_REGISTER.json
- production/districts/D02-CrownKey/planning/prep/R01/ASSET_INPUTS_A.json
- production/districts/D02-CrownKey/planning/prep/R01/KIT_CATALOG.json
- production/handoffs/quik/2026-10-16/crown-landmark/R01/COORDINATION/BUILDING_DIMENSIONS.json
- production/handoffs/quik/2026-10-16/crown-landmark/R01/COORDINATION/SPATIAL_REVIEW/L25_Fit_Review.png
- production/handoffs/quik/2026-10-16/crown-landmark/R01/COORDINATION/SPATIAL_REVIEW/L26_Fit_Review.png
- production/handoffs/quik/2026-10-16/crown-landmark/SHELL-C01/MODEL/FIT_REVIEW.json
- production/handoffs/quik/2026-10-16/crown-landmark/SHELL-C01/MODEL/MODEL_MEASUREMENTS.json
- production/handoffs/quik/2026-10-16/crown-landmark/SHELL-C01/MODEL/PI-BLD-0001-V01_CrownLandmark_SHELL_C01.glb (GLB not served on the website; the original model is preserved in the project)
- production/handoffs/quik/2026-10-16/crown-landmark/SHELL-C01/MODEL/PI-BLD-0001-V01_CrownLandmark_SHELL_C01.obj
- production/handoffs/quik/2026-10-16/crown-landmark/SHELL-C01/MODEL/VIEWS/C01_elevated.png
- production/handoffs/quik/2026-10-16/crown-landmark/SHELL-C01/MODEL/VIEWS/C01_front.png
- production/handoffs/quik/2026-10-16/crown-landmark/SHELL-C01/MODEL/VIEWS/C01_rear.png
- production/handoffs/quik/2026-10-16/crown-landmark/SHELL-C01/MODEL/VIEWS/C01_top.png
- production/handoffs/quik/2026-10-16/crown-landmark/SHELL-C01/MODEL_SPEC.json
- production/handoffs/quik/2026-10-16/crown-landmark/SHELL-C01/README.md
- production/protocols/building/R05/GUIDE.md
- production/protocols/building/R05/README.md
- production/protocols/current.json
- production/protocols/district/R05/README.md
- production/workflows/spatial-imagery/R01/GUIDE.md
- production/world/SCALE_REGISTER.md








