{
  "asset_id": "PI-BLD-0001-V01",
  "purpose": "Coordinate a bounded review of the issued exterior/interior packs and C01 candidate, preserving all source artwork and room layout while preparing explicit shell-fit decisions.",
  "scope_basis": "P0; proposed Tier E. EXT R06 and INT R02 are issued; the register marks the shell pending and the L18/L19 host assignment proposed. C01 is an editable review candidate with an independent fit audit, not a design, shell, placement, or engine approval.",
  "components": [
    {
      "name": "R06 exterior target envelope",
      "role": "The C01 audit reports its candidate matches R06 authored 240 m height and 160 × 120 m foundation targets; the targets remain proposal basis, not accepted placement scale.",
      "evidence_kind": "source_record",
      "source_paths": [
        "production/assets/buildings/PI-BLD-0001-V01/EXT/R06/04_Handoff/MODELING_BRIEF.txt",
        "production/assets/buildings/PI-BLD-0001-V01/EXT/R06/05_ScaleAndPlan/PI-BLD-0001-V01_CrownLandmark_EXT_R06_DesignTargets.json",
        "production/handoffs/quik/2026-10-16/crown-landmark/SHELL-C01/README.md",
        "production/handoffs/quik/2026-10-16/crown-landmark/SHELL-C01/MODEL/FIT_REVIEW.json",
        "production/handoffs/quik/2026-10-16/crown-landmark/SHELL-C01/MODEL/MODEL_MEASUREMENTS.json"
      ],
      "open_questions": [
        "Does Legend accept the C01 interpretation beyond the authored R06 targets, especially the unprovided upper-envelope transitions?"
      ]
    },
    {
      "name": "Six principal ribs and podium",
      "role": "R06 identifies the master/front and 02_Rear as controlling visual authorities; C01 contains editable interpretations of these features.",
      "evidence_kind": "source_record",
      "source_paths": [
        "production/assets/buildings/PI-BLD-0001-V01/EXT/R06/04_Handoff/MODELING_BRIEF.txt",
        "production/assets/buildings/PI-BLD-0001-V01/EXT/R06/05_ScaleAndPlan/PI-BLD-0001-V01_CrownLandmark_EXT_R06_DesignTargets.json",
        "production/assets/buildings/PI-BLD-0001-V01/EXT/R06/01_Master/PI-BLD-0001-V01_CrownLandmark_EXT_R06_Master_Tall.jpeg",
        "production/assets/buildings/PI-BLD-0001-V01/EXT/R06/03_IndividualViews/PI-BLD-0001-V01_CrownLandmark_EXT_R06_01_Front.png",
        "production/assets/buildings/PI-BLD-0001-V01/EXT/R06/03_IndividualViews/PI-BLD-0001-V01_CrownLandmark_EXT_R06_02_Rear.png",
        "production/handoffs/quik/2026-10-16/crown-landmark/SHELL-C01/README.md",
        "production/handoffs/quik/2026-10-16/crown-landmark/SHELL-C01/MODEL_SPEC.json"
      ],
      "open_questions": [
        "Which qualitative deviations in C01 ribs, podium fascia, crown, and rear treatment need a revised candidate before any shell review?"
      ]
    },
    {
      "name": "L25 council and L26 diplomacy planning zones",
      "role": "The existing INT R02 layout and schedules are preserved; the independent C01 audit flags three L26 source rectangles against its stated proposed perimeter allowance.",
      "evidence_kind": "source_record",
      "source_paths": [
        "production/assets/buildings/PI-BLD-0001-V01/INT/R02/06_Handoff/MODELING_BRIEF.txt",
        "production/assets/buildings/PI-BLD-0001-V01/INT/R02/06_Handoff/EditableLayout/INTERIOR_LAYOUT.json",
        "production/handoffs/quik/2026-10-16/crown-landmark/SHELL-C01/MODEL/FIT_REVIEW.json",
        "production/handoffs/quik/2026-10-16/crown-landmark/R01/COORDINATION/SPATIAL_REVIEW/L25_Fit_Review.png",
        "production/handoffs/quik/2026-10-16/crown-landmark/R01/COORDINATION/SPATIAL_REVIEW/L26_Fit_Review.png"
      ],
      "open_questions": [
        "Resolve the private office, secured records, and private vestibule fit finding jointly with envelope/recess/structure review; do not silently shrink or move the source rooms."
      ]
    },
    {
      "name": "Arrival, core, atrium and circulation",
      "role": "INT R02 describes lobby, atrium/gallery, lifts, stairs, service access, and separate diplomacy access as a design proposal; C01 is not a complete entrance/core assembly.",
      "evidence_kind": "source_record",
      "source_paths": [
        "production/assets/buildings/PI-BLD-0001-V01/INT/R02/06_Handoff/MODELING_BRIEF.txt",
        "production/assets/buildings/PI-BLD-0001-V01/INT/R02/06_Handoff/EditableLayout/INTERIOR_LAYOUT.json",
        "production/handoffs/quik/2026-10-16/crown-landmark/SHELL-C01/README.md",
        "production/handoffs/quik/2026-10-16/crown-landmark/SHELL-C01/MODEL_SPEC.json"
      ],
      "open_questions": [
        "What selected rooms/routes must be included in the first shell-fit review, and which remain deferred?"
      ]
    }
  ],
  "modeling_sequence": [
    {
      "step": 1,
      "title": "Freeze source baseline",
      "action": "Record hashes/revisions for R06, INT R02, the C01 GLB/OBJ and its fit report; leave C01, source rooms, approvals and hold status unchanged.",
      "gate": "Review must identify the exact unchanged candidate and source inputs before interpreting fit.",
      "source_paths": [
        "production/assets/buildings/PI-BLD-0001-V01/EXT/R06/04_Handoff/MODELING_BRIEF.txt",
        "production/assets/buildings/PI-BLD-0001-V01/INT/R02/06_Handoff/MODELING_BRIEF.txt",
        "production/assets/buildings/PI-BLD-0001-V01/EXT/R06/05_ScaleAndPlan/PI-BLD-0001-V01_CrownLandmark_EXT_R06_DesignTargets.json",
        "production/assets/buildings/PI-BLD-0001-V01/INT/R02/06_Handoff/EditableLayout/INTERIOR_LAYOUT.json",
        "production/handoffs/quik/2026-10-16/crown-landmark/SHELL-C01/MODEL/PI-BLD-0001-V01_CrownLandmark_SHELL_C01.glb",
        "production/handoffs/quik/2026-10-16/crown-landmark/SHELL-C01/MODEL/PI-BLD-0001-V01_CrownLandmark_SHELL_C01.obj",
        "production/handoffs/quik/2026-10-16/crown-landmark/SHELL-C01/MODEL/FIT_REVIEW.json",
        "production/handoffs/quik/2026-10-16/crown-landmark/SHELL-C01/README.md"
      ]
    },
    {
      "step": 2,
      "title": "Compare C01 with R06 authority",
      "action": "Use named front, rear and overhead views from the same C01 mesh. Treat artwork comparison as qualitative because camera calibration is not established; use R06 authored targets only for the dimensions explicitly supplied there.",
      "gate": "Report target checks separately from visual-design acceptance; 02_Rear remains the rear authority.",
      "source_paths": [
        "production/assets/buildings/PI-BLD-0001-V01/EXT/R06/04_Handoff/MODELING_BRIEF.txt",
        "production/assets/buildings/PI-BLD-0001-V01/EXT/R06/05_ScaleAndPlan/PI-BLD-0001-V01_CrownLandmark_EXT_R06_DesignTargets.json",
        "production/assets/buildings/PI-BLD-0001-V01/EXT/R06/01_Master/PI-BLD-0001-V01_CrownLandmark_EXT_R06_Master_Tall.jpeg",
        "production/assets/buildings/PI-BLD-0001-V01/EXT/R06/03_IndividualViews/PI-BLD-0001-V01_CrownLandmark_EXT_R06_01_Front.png",
        "production/assets/buildings/PI-BLD-0001-V01/EXT/R06/03_IndividualViews/PI-BLD-0001-V01_CrownLandmark_EXT_R06_02_Rear.png",
        "production/assets/buildings/PI-BLD-0001-V01/EXT/R06/05_ScaleAndPlan/PI-BLD-0001-V01_CrownLandmark_EXT_R06_13_RoofFootprintPlan.png",
        "production/handoffs/quik/2026-10-16/crown-landmark/SHELL-C01/MODEL/VIEWS/C01_front.png",
        "production/handoffs/quik/2026-10-16/crown-landmark/SHELL-C01/MODEL/VIEWS/C01_rear.png",
        "production/handoffs/quik/2026-10-16/crown-landmark/SHELL-C01/MODEL/VIEWS/C01_top.png",
        "production/handoffs/quik/2026-10-16/crown-landmark/SHELL-C01/MODEL/FIT_REVIEW.json"
      ]
    },
    {
      "step": 3,
      "title": "Reconcile INT R02 fit findings",
      "action": "Review the reported L25/L26 planning-zone containment and exact L26 flags against the unchanged INT R02 source, then list envelope/recess/structure and layout options without editing either source.",
      "gate": "Legend selects any revision direction; a limited rectangle audit is not furnished, rib, access, or engine acceptance.",
      "source_paths": [
        "production/assets/buildings/PI-BLD-0001-V01/INT/R02/06_Handoff/MODELING_BRIEF.txt",
        "production/assets/buildings/PI-BLD-0001-V01/INT/R02/06_Handoff/EditableLayout/INTERIOR_LAYOUT.json",
        "production/handoffs/quik/2026-10-16/crown-landmark/SHELL-C01/MODEL/FIT_REVIEW.json",
        "production/handoffs/quik/2026-10-16/crown-landmark/R01/COORDINATION/SPATIAL_REVIEW/L25_Fit_Review.png",
        "production/handoffs/quik/2026-10-16/crown-landmark/R01/COORDINATION/SPATIAL_REVIEW/L26_Fit_Review.png"
      ]
    },
    {
      "step": 4,
      "title": "Prepare a scoped revision decision",
      "action": "If requested, write a change-impact list for envelope, room zones, access, sightlines, and reusable components; do not implement changes under this prep record.",
      "gate": "No changes to C01, room layout, design approvals, or construction hold without explicit review.",
      "source_paths": [
        "production/assets/buildings/PI-BLD-0001-V01/EXT/R06/04_Handoff/MODELING_BRIEF.txt",
        "production/assets/buildings/PI-BLD-0001-V01/INT/R02/06_Handoff/MODELING_BRIEF.txt",
        "production/handoffs/quik/2026-10-16/crown-landmark/SHELL-C01/README.md",
        "production/handoffs/quik/2026-10-16/crown-landmark/SHELL-C01/MODEL/FIT_REVIEW.json"
      ]
    },
    {
      "step": 5,
      "title": "Return review evidence",
      "action": "Return source hashes, named-view comparisons, audit limitations, unresolved decisions and the exact candidate revision. Keep placement, UE import, collision, and runtime claims open.",
      "gate": "Separate creator visual review, shell acceptance, placement and engine acceptance.",
      "source_paths": [
        "production/handoffs/quik/2026-10-16/crown-landmark/SHELL-C01/MODEL/FIT_REVIEW.json",
        "production/handoffs/quik/2026-10-16/crown-landmark/SHELL-C01/MODEL/MODEL_MEASUREMENTS.json",
        "production/handoffs/quik/2026-10-16/crown-landmark/SHELL-C01/MODEL_SPEC.json",
        "production/handoffs/quik/2026-10-16/crown-landmark/SHELL-C01/README.md",
        "production/protocols/building/R05/GUIDE.md"
      ]
    }
  ],
  "required_views": [
    {
      "view": "C01 front against R06 master/front",
      "purpose": "Review broad silhouette and entrance qualitatively from the same candidate mesh; do not claim pixel-calibrated dimensional agreement.",
      "source_paths": [
        "production/handoffs/quik/2026-10-16/crown-landmark/SHELL-C01/MODEL/VIEWS/C01_front.png",
        "production/assets/buildings/PI-BLD-0001-V01/EXT/R06/01_Master/PI-BLD-0001-V01_CrownLandmark_EXT_R06_Master_Tall.jpeg",
        "production/assets/buildings/PI-BLD-0001-V01/EXT/R06/03_IndividualViews/PI-BLD-0001-V01_CrownLandmark_EXT_R06_01_Front.png",
        "production/handoffs/quik/2026-10-16/crown-landmark/SHELL-C01/MODEL/FIT_REVIEW.json"
      ]
    },
    {
      "view": "C01 rear against R06 02_Rear",
      "purpose": "Check the controlling crossed-gold rear treatment and record differences without substituting the secondary B02 comparison.",
      "source_paths": [
        "production/handoffs/quik/2026-10-16/crown-landmark/SHELL-C01/MODEL/VIEWS/C01_rear.png",
        "production/assets/buildings/PI-BLD-0001-V01/EXT/R06/03_IndividualViews/PI-BLD-0001-V01_CrownLandmark_EXT_R06_02_Rear.png",
        "production/assets/buildings/PI-BLD-0001-V01/EXT/R06/04_Handoff/MODELING_BRIEF.txt"
      ]
    },
    {
      "view": "True overhead footprint",
      "purpose": "Compare C01 top view to the R06 roof-footprint schematic; distinguish the authored target from unapproved shell acceptance.",
      "source_paths": [
        "production/handoffs/quik/2026-10-16/crown-landmark/SHELL-C01/MODEL/VIEWS/C01_top.png",
        "production/assets/buildings/PI-BLD-0001-V01/EXT/R06/05_ScaleAndPlan/PI-BLD-0001-V01_CrownLandmark_EXT_R06_13_RoofFootprintPlan.png",
        "production/assets/buildings/PI-BLD-0001-V01/EXT/R06/05_ScaleAndPlan/PI-BLD-0001-V01_CrownLandmark_EXT_R06_DesignTargets.json",
        "production/handoffs/quik/2026-10-16/crown-landmark/SHELL-C01/MODEL/FIT_REVIEW.json"
      ]
    },
    {
      "view": "L25 and L26 source-zone fit review",
      "purpose": "Inspect existing overlays and the exact audit flags, keeping the interior source rectangles unchanged pending a decision.",
      "source_paths": [
        "production/handoffs/quik/2026-10-16/crown-landmark/R01/COORDINATION/SPATIAL_REVIEW/L25_Fit_Review.png",
        "production/handoffs/quik/2026-10-16/crown-landmark/R01/COORDINATION/SPATIAL_REVIEW/L26_Fit_Review.png",
        "production/assets/buildings/PI-BLD-0001-V01/INT/R02/06_Handoff/EditableLayout/INTERIOR_LAYOUT.json",
        "production/handoffs/quik/2026-10-16/crown-landmark/SHELL-C01/MODEL/FIT_REVIEW.json"
      ]
    },
    {
      "view": "C01 elevated/side views",
      "purpose": "Review candidate crown, rib, podium and envelope interpretations before deciding whether a new candidate revision is needed.",
      "source_paths": [
        "production/handoffs/quik/2026-10-16/crown-landmark/SHELL-C01/MODEL/VIEWS/C01_elevated.png",
        "production/handoffs/quik/2026-10-16/crown-landmark/SHELL-C01/MODEL_SPEC.json",
        "production/assets/buildings/PI-BLD-0001-V01/EXT/R06/04_Handoff/MODELING_BRIEF.txt",
        "production/handoffs/quik/2026-10-16/crown-landmark/SHELL-C01/README.md"
      ]
    }
  ],
  "candidate_kit_ids": [
    "CK-KIT-LANDMARK",
    "CK-KIT-LOBBY",
    "CK-KIT-CORE",
    "CK-KIT-PROPS"
  ],
  "dependencies": [],
  "decision_queue": [
    {
      "question": "Should C01 remain a review candidate as modeled, or should an explicitly scoped new exterior candidate address named qualitative mismatches?",
      "owner": "Legend",
      "resolution_evidence": "Recorded creator review against R06 master/front/02_Rear and documented change-impact list; C01 itself is not approval.",
      "source_paths": [
        "production/assets/buildings/PI-BLD-0001-V01/EXT/R06/04_Handoff/MODELING_BRIEF.txt",
        "production/handoffs/quik/2026-10-16/crown-landmark/SHELL-C01/README.md",
        "production/handoffs/quik/2026-10-16/crown-landmark/SHELL-C01/MODEL/FIT_REVIEW.json"
      ]
    },
    {
      "question": "How should the three flagged L26 planning rectangles be reconciled with the candidate shell/recess/structure while preserving the INT R02 layout until a decision?",
      "owner": "Legend with layout author; Quik supplies candidate measurements",
      "resolution_evidence": "Joint review of unchanged INT R02 layout, C01 section evidence, and an approved revision instruction if any.",
      "source_paths": [
        "production/assets/buildings/PI-BLD-0001-V01/INT/R02/06_Handoff/MODELING_BRIEF.txt",
        "production/assets/buildings/PI-BLD-0001-V01/INT/R02/06_Handoff/EditableLayout/INTERIOR_LAYOUT.json",
        "production/handoffs/quik/2026-10-16/crown-landmark/SHELL-C01/MODEL/FIT_REVIEW.json",
        "production/handoffs/quik/2026-10-16/crown-landmark/R01/COORDINATION/SPATIAL_REVIEW/L26_Fit_Review.png"
      ]
    },
    {
      "question": "Which selected-room routes and rooms are required in the first shell-fit sample, including independent L26 access?",
      "owner": "Legend",
      "resolution_evidence": "A scoped enterability decision linked to the existing room/access plan and a reviewed route/clearance plan.",
      "source_paths": [
        "production/assets/buildings/PI-BLD-0001-V01/INT/R02/06_Handoff/MODELING_BRIEF.txt",
        "production/assets/buildings/PI-BLD-0001-V01/INT/R02/06_Handoff/EditableLayout/INTERIOR_LAYOUT.json",
        "production/protocols/building/R05/GUIDE.md"
      ]
    },
    {
      "question": "What exact project branch/map and UE checks will establish later engine evidence for this candidate?",
      "owner": "Quik",
      "resolution_evidence": "Current-project report naming branch/commit, engine version, map, measured import state, and separately scoped runtime tests.",
      "source_paths": [
        "production/protocols/building/R05/GUIDE.md",
        "production/world/SCALE_REGISTER.md",
        "docs/current-decisions.md"
      ]
    }
  ],
  "friday_work": {
    "can_prepare": [
      "Hash and inspect the existing C01 candidate, R06 source, INT R02 layout, and independent fit audit without modifying any of them.",
      "Prepare a review packet for the existing L25/L26 overlays and named C01/R06 views, with fit limits and open decisions clearly separated."
    ],
    "requires_decision": [
      "Legend direction on C01 visual deviations and any new candidate revision.",
      "A jointly reviewed response to the L26 perimeter findings; no room-layout or C01 edits under this prep record.",
      "Quik project/branch/map evidence and any engine execution plan; this prep does not lift the construction hold."
    ],
    "return_evidence": [
      "Exact model/source hashes and rerun fit-audit output if independently reproduced.",
      "Annotated R06/C01 comparisons and L25/L26 fit issue list that preserves the audit limitations.",
      "Any approved follow-up instruction as a separate revision/task; no shell, placement, or engine-ready claim."
    ]
  },
  "schema_version": 1,
  "revision": "R01",
  "date": "2026-10-16",
  "status": "DRAFT_PRODUCTION_PREP",
  "status_notice": "Draft preparation only; not an issued reference pack, shell, approval or construction release. Foundation hold remains in force; preparation does not authorize construction or accept dimensions, placement or engine readiness.",
  "name": "Crown Landmark",
  "kind": "building",
  "priority": "P0",
  "protocol_revisions": {
    "building": "R05",
    "district": "R05",
    "spatial_imagery": "R01"
  },
  "source_main_commit": "8e9c5949400a528e0e16274e137653584a5560eb",
  "register_tasks": [
    {
      "id": "PI-BLD-0001-V01-01",
      "work": "Confirm parcel/placement and controlling exterior references; reconcile current UE state",
      "status": "pending"
    },
    {
      "id": "PI-BLD-0001-V01-02",
      "work": "Approve envelope, levels, core and dimensions; record scale source and exceptions",
      "status": "pending"
    },
    {
      "id": "PI-BLD-0001-V01-03",
      "work": "Issue dimensioned site/ground/roof plans, distinct-floor plans and necessary sections",
      "status": "pending"
    },
    {
      "id": "PI-BLD-0001-V01-04",
      "work": "Reconcile existing INT R02, do not restart it. Test L25 +126 m and L26 +130.5 m against taper/ribs; preserve independent diplomacy access.",
      "status": "pending"
    },
    {
      "id": "PI-BLD-0001-V01-05",
      "work": "Select enterability and implement only the approved room/kit program: Existing atrium/gallery and circulation; council/vote suite, waiting, celebration, windowed corridor; diplomacy breakfast, office, private lounge and secured records",
      "status": "candidate_scope"
    },
    {
      "id": "PI-BLD-0001-V01-06",
      "work": "Review shell fit and a furnished/player-camera sample; derive actual window/site views",
      "status": "pending"
    },
    {
      "id": "PI-BLD-0001-V01-07",
      "work": "Verify collision, navigation, access, streaming, materials and performance; issue manifest and current commit evidence",
      "status": "pending"
    }
  ],
  "authoritative_dimension_contract": "production/handoffs/quik/2026-10-16/crown-landmark/R01/COORDINATION/BUILDING_DIMENSIONS.json",
  "dimensions_status": "existing_contract_requires_review",
  "input_record": {
    "asset_id": "PI-BLD-0001-V01",
    "purpose": "Coordinate a bounded review of the issued exterior/interior packs and C01 candidate, preserving all source artwork and room layout while preparing explicit shell-fit decisions.",
    "scope_basis": "P0; proposed Tier E. EXT R06 and INT R02 are issued; the register marks the shell pending and the L18/L19 host assignment proposed. C01 is an editable review candidate with an independent fit audit, not a design, shell, placement, or engine approval.",
    "components": [
      {
        "name": "R06 exterior target envelope",
        "role": "The C01 audit reports its candidate matches R06 authored 240 m height and 160 × 120 m foundation targets; the targets remain proposal basis, not accepted placement scale.",
        "evidence_kind": "source_record",
        "source_paths": [
          "production/assets/buildings/PI-BLD-0001-V01/EXT/R06/04_Handoff/MODELING_BRIEF.txt",
          "production/assets/buildings/PI-BLD-0001-V01/EXT/R06/05_ScaleAndPlan/PI-BLD-0001-V01_CrownLandmark_EXT_R06_DesignTargets.json",
          "production/handoffs/quik/2026-10-16/crown-landmark/SHELL-C01/README.md",
          "production/handoffs/quik/2026-10-16/crown-landmark/SHELL-C01/MODEL/FIT_REVIEW.json",
          "production/handoffs/quik/2026-10-16/crown-landmark/SHELL-C01/MODEL/MODEL_MEASUREMENTS.json"
        ],
        "open_questions": [
          "Does Legend accept the C01 interpretation beyond the authored R06 targets, especially the unprovided upper-envelope transitions?"
        ]
      },
      {
        "name": "Six principal ribs and podium",
        "role": "R06 identifies the master/front and 02_Rear as controlling visual authorities; C01 contains editable interpretations of these features.",
        "evidence_kind": "source_record",
        "source_paths": [
          "production/assets/buildings/PI-BLD-0001-V01/EXT/R06/04_Handoff/MODELING_BRIEF.txt",
          "production/assets/buildings/PI-BLD-0001-V01/EXT/R06/05_ScaleAndPlan/PI-BLD-0001-V01_CrownLandmark_EXT_R06_DesignTargets.json",
          "production/assets/buildings/PI-BLD-0001-V01/EXT/R06/01_Master/PI-BLD-0001-V01_CrownLandmark_EXT_R06_Master_Tall.jpeg",
          "production/assets/buildings/PI-BLD-0001-V01/EXT/R06/03_IndividualViews/PI-BLD-0001-V01_CrownLandmark_EXT_R06_01_Front.png",
          "production/assets/buildings/PI-BLD-0001-V01/EXT/R06/03_IndividualViews/PI-BLD-0001-V01_CrownLandmark_EXT_R06_02_Rear.png",
          "production/handoffs/quik/2026-10-16/crown-landmark/SHELL-C01/README.md",
          "production/handoffs/quik/2026-10-16/crown-landmark/SHELL-C01/MODEL_SPEC.json"
        ],
        "open_questions": [
          "Which qualitative deviations in C01 ribs, podium fascia, crown, and rear treatment need a revised candidate before any shell review?"
        ]
      },
      {
        "name": "L25 council and L26 diplomacy planning zones",
        "role": "The existing INT R02 layout and schedules are preserved; the independent C01 audit flags three L26 source rectangles against its stated proposed perimeter allowance.",
        "evidence_kind": "source_record",
        "source_paths": [
          "production/assets/buildings/PI-BLD-0001-V01/INT/R02/06_Handoff/MODELING_BRIEF.txt",
          "production/assets/buildings/PI-BLD-0001-V01/INT/R02/06_Handoff/EditableLayout/INTERIOR_LAYOUT.json",
          "production/handoffs/quik/2026-10-16/crown-landmark/SHELL-C01/MODEL/FIT_REVIEW.json",
          "production/handoffs/quik/2026-10-16/crown-landmark/R01/COORDINATION/SPATIAL_REVIEW/L25_Fit_Review.png",
          "production/handoffs/quik/2026-10-16/crown-landmark/R01/COORDINATION/SPATIAL_REVIEW/L26_Fit_Review.png"
        ],
        "open_questions": [
          "Resolve the private office, secured records, and private vestibule fit finding jointly with envelope/recess/structure review; do not silently shrink or move the source rooms."
        ]
      },
      {
        "name": "Arrival, core, atrium and circulation",
        "role": "INT R02 describes lobby, atrium/gallery, lifts, stairs, service access, and separate diplomacy access as a design proposal; C01 is not a complete entrance/core assembly.",
        "evidence_kind": "source_record",
        "source_paths": [
          "production/assets/buildings/PI-BLD-0001-V01/INT/R02/06_Handoff/MODELING_BRIEF.txt",
          "production/assets/buildings/PI-BLD-0001-V01/INT/R02/06_Handoff/EditableLayout/INTERIOR_LAYOUT.json",
          "production/handoffs/quik/2026-10-16/crown-landmark/SHELL-C01/README.md",
          "production/handoffs/quik/2026-10-16/crown-landmark/SHELL-C01/MODEL_SPEC.json"
        ],
        "open_questions": [
          "What selected rooms/routes must be included in the first shell-fit review, and which remain deferred?"
        ]
      }
    ],
    "modeling_sequence": [
      {
        "step": 1,
        "title": "Freeze source baseline",
        "action": "Record hashes/revisions for R06, INT R02, the C01 GLB/OBJ and its fit report; leave C01, source rooms, approvals and hold status unchanged.",
        "gate": "Review must identify the exact unchanged candidate and source inputs before interpreting fit.",
        "source_paths": [
          "production/assets/buildings/PI-BLD-0001-V01/EXT/R06/04_Handoff/MODELING_BRIEF.txt",
          "production/assets/buildings/PI-BLD-0001-V01/INT/R02/06_Handoff/MODELING_BRIEF.txt",
          "production/assets/buildings/PI-BLD-0001-V01/EXT/R06/05_ScaleAndPlan/PI-BLD-0001-V01_CrownLandmark_EXT_R06_DesignTargets.json",
          "production/assets/buildings/PI-BLD-0001-V01/INT/R02/06_Handoff/EditableLayout/INTERIOR_LAYOUT.json",
          "production/handoffs/quik/2026-10-16/crown-landmark/SHELL-C01/MODEL/PI-BLD-0001-V01_CrownLandmark_SHELL_C01.glb",
          "production/handoffs/quik/2026-10-16/crown-landmark/SHELL-C01/MODEL/PI-BLD-0001-V01_CrownLandmark_SHELL_C01.obj",
          "production/handoffs/quik/2026-10-16/crown-landmark/SHELL-C01/MODEL/FIT_REVIEW.json",
          "production/handoffs/quik/2026-10-16/crown-landmark/SHELL-C01/README.md"
        ]
      },
      {
        "step": 2,
        "title": "Compare C01 with R06 authority",
        "action": "Use named front, rear and overhead views from the same C01 mesh. Treat artwork comparison as qualitative because camera calibration is not established; use R06 authored targets only for the dimensions explicitly supplied there.",
        "gate": "Report target checks separately from visual-design acceptance; 02_Rear remains the rear authority.",
        "source_paths": [
          "production/assets/buildings/PI-BLD-0001-V01/EXT/R06/04_Handoff/MODELING_BRIEF.txt",
          "production/assets/buildings/PI-BLD-0001-V01/EXT/R06/05_ScaleAndPlan/PI-BLD-0001-V01_CrownLandmark_EXT_R06_DesignTargets.json",
          "production/assets/buildings/PI-BLD-0001-V01/EXT/R06/01_Master/PI-BLD-0001-V01_CrownLandmark_EXT_R06_Master_Tall.jpeg",
          "production/assets/buildings/PI-BLD-0001-V01/EXT/R06/03_IndividualViews/PI-BLD-0001-V01_CrownLandmark_EXT_R06_01_Front.png",
          "production/assets/buildings/PI-BLD-0001-V01/EXT/R06/03_IndividualViews/PI-BLD-0001-V01_CrownLandmark_EXT_R06_02_Rear.png",
          "production/assets/buildings/PI-BLD-0001-V01/EXT/R06/05_ScaleAndPlan/PI-BLD-0001-V01_CrownLandmark_EXT_R06_13_RoofFootprintPlan.png",
          "production/handoffs/quik/2026-10-16/crown-landmark/SHELL-C01/MODEL/VIEWS/C01_front.png",
          "production/handoffs/quik/2026-10-16/crown-landmark/SHELL-C01/MODEL/VIEWS/C01_rear.png",
          "production/handoffs/quik/2026-10-16/crown-landmark/SHELL-C01/MODEL/VIEWS/C01_top.png",
          "production/handoffs/quik/2026-10-16/crown-landmark/SHELL-C01/MODEL/FIT_REVIEW.json"
        ]
      },
      {
        "step": 3,
        "title": "Reconcile INT R02 fit findings",
        "action": "Review the reported L25/L26 planning-zone containment and exact L26 flags against the unchanged INT R02 source, then list envelope/recess/structure and layout options without editing either source.",
        "gate": "Legend selects any revision direction; a limited rectangle audit is not furnished, rib, access, or engine acceptance.",
        "source_paths": [
          "production/assets/buildings/PI-BLD-0001-V01/INT/R02/06_Handoff/MODELING_BRIEF.txt",
          "production/assets/buildings/PI-BLD-0001-V01/INT/R02/06_Handoff/EditableLayout/INTERIOR_LAYOUT.json",
          "production/handoffs/quik/2026-10-16/crown-landmark/SHELL-C01/MODEL/FIT_REVIEW.json",
          "production/handoffs/quik/2026-10-16/crown-landmark/R01/COORDINATION/SPATIAL_REVIEW/L25_Fit_Review.png",
          "production/handoffs/quik/2026-10-16/crown-landmark/R01/COORDINATION/SPATIAL_REVIEW/L26_Fit_Review.png"
        ]
      },
      {
        "step": 4,
        "title": "Prepare a scoped revision decision",
        "action": "If requested, write a change-impact list for envelope, room zones, access, sightlines, and reusable components; do not implement changes under this prep record.",
        "gate": "No changes to C01, room layout, design approvals, or construction hold without explicit review.",
        "source_paths": [
          "production/assets/buildings/PI-BLD-0001-V01/EXT/R06/04_Handoff/MODELING_BRIEF.txt",
          "production/assets/buildings/PI-BLD-0001-V01/INT/R02/06_Handoff/MODELING_BRIEF.txt",
          "production/handoffs/quik/2026-10-16/crown-landmark/SHELL-C01/README.md",
          "production/handoffs/quik/2026-10-16/crown-landmark/SHELL-C01/MODEL/FIT_REVIEW.json"
        ]
      },
      {
        "step": 5,
        "title": "Return review evidence",
        "action": "Return source hashes, named-view comparisons, audit limitations, unresolved decisions and the exact candidate revision. Keep placement, UE import, collision, and runtime claims open.",
        "gate": "Separate creator visual review, shell acceptance, placement and engine acceptance.",
        "source_paths": [
          "production/handoffs/quik/2026-10-16/crown-landmark/SHELL-C01/MODEL/FIT_REVIEW.json",
          "production/handoffs/quik/2026-10-16/crown-landmark/SHELL-C01/MODEL/MODEL_MEASUREMENTS.json",
          "production/handoffs/quik/2026-10-16/crown-landmark/SHELL-C01/MODEL_SPEC.json",
          "production/handoffs/quik/2026-10-16/crown-landmark/SHELL-C01/README.md",
          "production/protocols/building/R05/GUIDE.md"
        ]
      }
    ],
    "required_views": [
      {
        "view": "C01 front against R06 master/front",
        "purpose": "Review broad silhouette and entrance qualitatively from the same candidate mesh; do not claim pixel-calibrated dimensional agreement.",
        "source_paths": [
          "production/handoffs/quik/2026-10-16/crown-landmark/SHELL-C01/MODEL/VIEWS/C01_front.png",
          "production/assets/buildings/PI-BLD-0001-V01/EXT/R06/01_Master/PI-BLD-0001-V01_CrownLandmark_EXT_R06_Master_Tall.jpeg",
          "production/assets/buildings/PI-BLD-0001-V01/EXT/R06/03_IndividualViews/PI-BLD-0001-V01_CrownLandmark_EXT_R06_01_Front.png",
          "production/handoffs/quik/2026-10-16/crown-landmark/SHELL-C01/MODEL/FIT_REVIEW.json"
        ]
      },
      {
        "view": "C01 rear against R06 02_Rear",
        "purpose": "Check the controlling crossed-gold rear treatment and record differences without substituting the secondary B02 comparison.",
        "source_paths": [
          "production/handoffs/quik/2026-10-16/crown-landmark/SHELL-C01/MODEL/VIEWS/C01_rear.png",
          "production/assets/buildings/PI-BLD-0001-V01/EXT/R06/03_IndividualViews/PI-BLD-0001-V01_CrownLandmark_EXT_R06_02_Rear.png",
          "production/assets/buildings/PI-BLD-0001-V01/EXT/R06/04_Handoff/MODELING_BRIEF.txt"
        ]
      },
      {
        "view": "True overhead footprint",
        "purpose": "Compare C01 top view to the R06 roof-footprint schematic; distinguish the authored target from unapproved shell acceptance.",
        "source_paths": [
          "production/handoffs/quik/2026-10-16/crown-landmark/SHELL-C01/MODEL/VIEWS/C01_top.png",
          "production/assets/buildings/PI-BLD-0001-V01/EXT/R06/05_ScaleAndPlan/PI-BLD-0001-V01_CrownLandmark_EXT_R06_13_RoofFootprintPlan.png",
          "production/assets/buildings/PI-BLD-0001-V01/EXT/R06/05_ScaleAndPlan/PI-BLD-0001-V01_CrownLandmark_EXT_R06_DesignTargets.json",
          "production/handoffs/quik/2026-10-16/crown-landmark/SHELL-C01/MODEL/FIT_REVIEW.json"
        ]
      },
      {
        "view": "L25 and L26 source-zone fit review",
        "purpose": "Inspect existing overlays and the exact audit flags, keeping the interior source rectangles unchanged pending a decision.",
        "source_paths": [
          "production/handoffs/quik/2026-10-16/crown-landmark/R01/COORDINATION/SPATIAL_REVIEW/L25_Fit_Review.png",
          "production/handoffs/quik/2026-10-16/crown-landmark/R01/COORDINATION/SPATIAL_REVIEW/L26_Fit_Review.png",
          "production/assets/buildings/PI-BLD-0001-V01/INT/R02/06_Handoff/EditableLayout/INTERIOR_LAYOUT.json",
          "production/handoffs/quik/2026-10-16/crown-landmark/SHELL-C01/MODEL/FIT_REVIEW.json"
        ]
      },
      {
        "view": "C01 elevated/side views",
        "purpose": "Review candidate crown, rib, podium and envelope interpretations before deciding whether a new candidate revision is needed.",
        "source_paths": [
          "production/handoffs/quik/2026-10-16/crown-landmark/SHELL-C01/MODEL/VIEWS/C01_elevated.png",
          "production/handoffs/quik/2026-10-16/crown-landmark/SHELL-C01/MODEL_SPEC.json",
          "production/assets/buildings/PI-BLD-0001-V01/EXT/R06/04_Handoff/MODELING_BRIEF.txt",
          "production/handoffs/quik/2026-10-16/crown-landmark/SHELL-C01/README.md"
        ]
      }
    ],
    "candidate_kit_ids": [
      "CK-KIT-LANDMARK",
      "CK-KIT-LOBBY",
      "CK-KIT-CORE",
      "CK-KIT-PROPS"
    ],
    "dependencies": [],
    "decision_queue": [
      {
        "question": "Should C01 remain a review candidate as modeled, or should an explicitly scoped new exterior candidate address named qualitative mismatches?",
        "owner": "Legend",
        "resolution_evidence": "Recorded creator review against R06 master/front/02_Rear and documented change-impact list; C01 itself is not approval.",
        "source_paths": [
          "production/assets/buildings/PI-BLD-0001-V01/EXT/R06/04_Handoff/MODELING_BRIEF.txt",
          "production/handoffs/quik/2026-10-16/crown-landmark/SHELL-C01/README.md",
          "production/handoffs/quik/2026-10-16/crown-landmark/SHELL-C01/MODEL/FIT_REVIEW.json"
        ]
      },
      {
        "question": "How should the three flagged L26 planning rectangles be reconciled with the candidate shell/recess/structure while preserving the INT R02 layout until a decision?",
        "owner": "Legend with layout author; Quik supplies candidate measurements",
        "resolution_evidence": "Joint review of unchanged INT R02 layout, C01 section evidence, and an approved revision instruction if any.",
        "source_paths": [
          "production/assets/buildings/PI-BLD-0001-V01/INT/R02/06_Handoff/MODELING_BRIEF.txt",
          "production/assets/buildings/PI-BLD-0001-V01/INT/R02/06_Handoff/EditableLayout/INTERIOR_LAYOUT.json",
          "production/handoffs/quik/2026-10-16/crown-landmark/SHELL-C01/MODEL/FIT_REVIEW.json",
          "production/handoffs/quik/2026-10-16/crown-landmark/R01/COORDINATION/SPATIAL_REVIEW/L26_Fit_Review.png"
        ]
      },
      {
        "question": "Which selected-room routes and rooms are required in the first shell-fit sample, including independent L26 access?",
        "owner": "Legend",
        "resolution_evidence": "A scoped enterability decision linked to the existing room/access plan and a reviewed route/clearance plan.",
        "source_paths": [
          "production/assets/buildings/PI-BLD-0001-V01/INT/R02/06_Handoff/MODELING_BRIEF.txt",
          "production/assets/buildings/PI-BLD-0001-V01/INT/R02/06_Handoff/EditableLayout/INTERIOR_LAYOUT.json",
          "production/protocols/building/R05/GUIDE.md"
        ]
      },
      {
        "question": "What exact project branch/map and UE checks will establish later engine evidence for this candidate?",
        "owner": "Quik",
        "resolution_evidence": "Current-project report naming branch/commit, engine version, map, measured import state, and separately scoped runtime tests.",
        "source_paths": [
          "production/protocols/building/R05/GUIDE.md",
          "production/world/SCALE_REGISTER.md",
          "docs/current-decisions.md"
        ]
      }
    ],
    "friday_work": {
      "can_prepare": [
        "Hash and inspect the existing C01 candidate, R06 source, INT R02 layout, and independent fit audit without modifying any of them.",
        "Prepare a review packet for the existing L25/L26 overlays and named C01/R06 views, with fit limits and open decisions clearly separated."
      ],
      "requires_decision": [
        "Legend direction on C01 visual deviations and any new candidate revision.",
        "A jointly reviewed response to the L26 perimeter findings; no room-layout or C01 edits under this prep record.",
        "Quik project/branch/map evidence and any engine execution plan; this prep does not lift the construction hold."
      ],
      "return_evidence": [
        "Exact model/source hashes and rerun fit-audit output if independently reproduced.",
        "Annotated R06/C01 comparisons and L25/L26 fit issue list that preserves the audit limitations.",
        "Any approved follow-up instruction as a separate revision/task; no shell, placement, or engine-ready claim."
      ]
    }
  },
  "source_hash_inventory": [
    {
      "path": "docs/current-decisions.md",
      "sha256": "8001f9a1c613b326b030da3ace10947a3021dc12f9273b7c7fa46d0ade10d382"
    },
    {
      "path": "production/assets/buildings/PI-BLD-0001-V01/EXT/R06/01_Master/PI-BLD-0001-V01_CrownLandmark_EXT_R06_Master_Tall.jpeg",
      "sha256": "b30b6697483eed817bf6c17d5b3db1ce7588568c92e7c2292c25ee95904181f0"
    },
    {
      "path": "production/assets/buildings/PI-BLD-0001-V01/EXT/R06/03_IndividualViews/PI-BLD-0001-V01_CrownLandmark_EXT_R06_01_Front.png",
      "sha256": "7ca6eb4ebd185d7c19ddfef7c50d6d1c9c4b5607f0a72887592401d67173b12d"
    },
    {
      "path": "production/assets/buildings/PI-BLD-0001-V01/EXT/R06/03_IndividualViews/PI-BLD-0001-V01_CrownLandmark_EXT_R06_02_Rear.png",
      "sha256": "27e1c49fdd0379a3307d21d58a20c95c73152d69eb61b8084432f33166456247"
    },
    {
      "path": "production/assets/buildings/PI-BLD-0001-V01/EXT/R06/04_Handoff/MODELING_BRIEF.txt",
      "sha256": "0edf593f4f6fecaa15226b4711f362fa19fe2bc0b6cacf547e43bf56fa5b3d16"
    },
    {
      "path": "production/assets/buildings/PI-BLD-0001-V01/EXT/R06/05_ScaleAndPlan/PI-BLD-0001-V01_CrownLandmark_EXT_R06_13_RoofFootprintPlan.png",
      "sha256": "8e9da05ec811a595cfada4fcbadfcba0d6831012498b4489b3e01b57bc0b5655"
    },
    {
      "path": "production/assets/buildings/PI-BLD-0001-V01/EXT/R06/05_ScaleAndPlan/PI-BLD-0001-V01_CrownLandmark_EXT_R06_DesignTargets.json",
      "sha256": "7ec4158a55e434cf2d94c5778763e41e968317007ca886dc8e2d94d0c806f8f8"
    },
    {
      "path": "production/assets/buildings/PI-BLD-0001-V01/INT/R02/06_Handoff/EditableLayout/INTERIOR_LAYOUT.json",
      "sha256": "aa14f38b150b966670397a3a12cd9bf054dafb387645a34149ebb5ed2a2942ff"
    },
    {
      "path": "production/assets/buildings/PI-BLD-0001-V01/INT/R02/06_Handoff/MODELING_BRIEF.txt",
      "sha256": "3110751b7d0e80583b937d17b4c3dc5c8b835665e22232ab1f77505e06707233"
    },
    {
      "path": "production/districts/D02-CrownKey/planning/BUILD_REGISTER.json",
      "sha256": "bb0a893c54a83f490e9ff59197e593ea1093a393209c7714d57997cd3c06df3e"
    },
    {
      "path": "production/districts/D02-CrownKey/planning/prep/R01/ASSET_INPUTS_A.json",
      "sha256": "8193933c210b0cfaa825428aae1a0d1d2b2fbe8f11d6c7befc0db81d7892d2d4"
    },
    {
      "path": "production/districts/D02-CrownKey/planning/prep/R01/KIT_CATALOG.json",
      "sha256": "52525e0754aee464c84793b3b3cfe2b6ae4c95981fd2bf3e67c2d91c02ada0b9"
    },
    {
      "path": "production/handoffs/quik/2026-10-16/crown-landmark/R01/COORDINATION/BUILDING_DIMENSIONS.json",
      "sha256": "2648fa977d89bafed538354de3dd30b1752a9f88de4e4ae320a2e491cf4d6d94"
    },
    {
      "path": "production/handoffs/quik/2026-10-16/crown-landmark/R01/COORDINATION/SPATIAL_REVIEW/L25_Fit_Review.png",
      "sha256": "7a42b0454ab8b34d2f8ba0d8bc5aa4bf8f37bd2f9b85c59ad9e0d110fba7494a"
    },
    {
      "path": "production/handoffs/quik/2026-10-16/crown-landmark/R01/COORDINATION/SPATIAL_REVIEW/L26_Fit_Review.png",
      "sha256": "9779f98e76c0c21cf1b3bd475ecddcb5924766b319a867e9b63536ebd81bb7b3"
    },
    {
      "path": "production/handoffs/quik/2026-10-16/crown-landmark/SHELL-C01/MODEL/FIT_REVIEW.json",
      "sha256": "546c9aaf696a0e253e60ca5957095451942a2dbcfc661f1a255f820af9d83215"
    },
    {
      "path": "production/handoffs/quik/2026-10-16/crown-landmark/SHELL-C01/MODEL/MODEL_MEASUREMENTS.json",
      "sha256": "479fd004ed2ae73b435cd4e3c1eb03f0d7f047d5fc473930d4b38f1d3f1bcd84"
    },
    {
      "path": "production/handoffs/quik/2026-10-16/crown-landmark/SHELL-C01/MODEL/PI-BLD-0001-V01_CrownLandmark_SHELL_C01.glb",
      "sha256": "599ace776556953b5689d2153cdf53511f3043fa3ce388d4ed4963fe8c6584b9"
    },
    {
      "path": "production/handoffs/quik/2026-10-16/crown-landmark/SHELL-C01/MODEL/PI-BLD-0001-V01_CrownLandmark_SHELL_C01.obj",
      "sha256": "2456263090ffbc28dffc935b1d3857a142e54eb554bafcd7ac948e50074c8c94"
    },
    {
      "path": "production/handoffs/quik/2026-10-16/crown-landmark/SHELL-C01/MODEL/VIEWS/C01_elevated.png",
      "sha256": "75b1662f9efbd99bbee72d4e6624b44b2950777489cd032ccd5c829fbe4b87ab"
    },
    {
      "path": "production/handoffs/quik/2026-10-16/crown-landmark/SHELL-C01/MODEL/VIEWS/C01_front.png",
      "sha256": "287986e1b344e86859f33a90cae482e4fb5b4b5cfa33d50af372f40196d03595"
    },
    {
      "path": "production/handoffs/quik/2026-10-16/crown-landmark/SHELL-C01/MODEL/VIEWS/C01_rear.png",
      "sha256": "48ce9795767542210856a0a59e0abd00e7afcb997bbbca25030601b6523e36a2"
    },
    {
      "path": "production/handoffs/quik/2026-10-16/crown-landmark/SHELL-C01/MODEL/VIEWS/C01_top.png",
      "sha256": "9ad0e358a5f61a6c52cb909c9d2e0c4f5d64887221b12bfd66e5dc17d638498d"
    },
    {
      "path": "production/handoffs/quik/2026-10-16/crown-landmark/SHELL-C01/MODEL_SPEC.json",
      "sha256": "55fe994e75bb3342d06d357c40f00343212127130d6f895be42dcbf6788c1f14"
    },
    {
      "path": "production/handoffs/quik/2026-10-16/crown-landmark/SHELL-C01/README.md",
      "sha256": "7ce83871b35a31bc28ba9c9254b96f14408ae1b39536b0376769fe08a9a96520"
    },
    {
      "path": "production/protocols/building/R05/GUIDE.md",
      "sha256": "006818490740b4bd9e3994a428da95390f9f4dd987c6fd6f67a8dd1dbbc24509"
    },
    {
      "path": "production/protocols/building/R05/README.md",
      "sha256": "ecb4c6b0bf144a5da037ba8817528c40cb59ce272bc9ca63b3d187e704dc2715"
    },
    {
      "path": "production/protocols/current.json",
      "sha256": "c7be63113d117523e6b2e608149e6b31620f2f50436f4fbbeebdd1ffb005881a"
    },
    {
      "path": "production/protocols/district/R05/README.md",
      "sha256": "f95ad3a6c25f181898fd3be47eac800b39b5f1790387f8e93d5450e75ace5a7d"
    },
    {
      "path": "production/workflows/spatial-imagery/R01/GUIDE.md",
      "sha256": "288df4dc11896d4e606f8dc49f8b1a6969679d1fad50fad7595f3e2c8b9ad173"
    },
    {
      "path": "production/world/SCALE_REGISTER.md",
      "sha256": "f56c19d5dbfd1c9b9228c4f34327f908ebee5c9bc9c9d3db2d617fa802accc8e"
    }
  ]
}
