New exterior candidate · R01
Open the model and drawings.
Proposed isolated geometry, four views from the same model, elevations, section and editable sources. Dimensions, shell acceptance, interiors and engine verification remain separate.
Exterior package and downloads →Draft production prep · R01 · 16 October 2026
Arcade Bay Module
Prepare an isolated candidate repeat-bay interface; keep source-card flat canopy/sidewall distinct from BLD-0010 curved/flared arches until fit is decided.
Current R02 scope requires a complete usable asset package. Design and isolated authoring can proceed; proposed dimensions, shell selection, site placement and actual engine checks retain explicit evidence status.
Current production program · R02
Exterior, usable spaces and a complete handoff.
Complete Arcade Bay Module with usable access, materials, clearances and coordinated building / waterfront interfaces.
Required spaces
- Continuous public access through the authored structure
- Defined service / restricted boundary and adjoining asset connection
Required exterior coverage
- Overall usable route
- Interface close-up
- User-eye approach / exit
- Section or clearance review from authored model
Delivery state: Scoped — complete design: not yet evidenced; reviewed build packet: not yet evidenced; engine verification: not yet evidenced.
Audited source baseline: Catalog/source preparation and starter records; no dedicated asset design pack, drawings or model identified.
Owner: OA1 / assign after first packages · Independent reviewer: OA1-assigned independent read-only reviewer
Five-seat production plan and kickoff briefs → · Full current scope → · Download all31 programs
R02 supersedes conflicting shell-only or deferred-interior recommendations in the earlier preparation records below. Proposed room uses do not create new story canon; references do not establish completed geometry.
Prepare now
- Prepare dimensionless single-bay parts with arch/canopy/wall/glazing/plinth separate.
- Draft three interface sketches; keep curved/corner parts separate.

Preparation / not geometry
What Quik will build and review.
Component labels come from this asset’s prep record. This board is a task map, not a dimensional drawing.
- 01Single arch baysource notes
- 02Canopy slab/sidewallsource notes
- 03Glazing/lightingsource notes
- 04Plinth/railsource notes
- 05Arcade interfacesproposed design
Modeling sequence
- 01Record module authorityNo compatibility inferred from name.
- 02Block one bayReview repeat vs end-cap components.
- 03Define connector fieldsNo connector rule before measurement.
- 04Test three relationshipsEach compatibility result is explicit.
- 05Package reuse evidenceUnresolved kit remains candidate, not production-ready.
Planned review views
Components & scope evidence
Scope basis: Card shows pointed arch, flared columns, flat-topped canopy, side wall, glazing and plinth. BLD-0010 notes show curved/flared shells that differ; module reuse is not assumed.
| Component | Role and evidence | Open questions |
|---|---|---|
| Single arch bay | Pointed opening, flared columns and main/smaller glazed fronts. source_notes |
|
| Canopy slab/sidewall | Thin overhang and square side wall from card. source_notes |
|
| Glazing/lighting | Dark mullions, warm interior and downlights. source_notes |
|
| Plinth/rail | Low front plinth/terrace and glass-metal rail. source_notes |
|
| Arcade interfaces | BLD-0010 forms conflict with flat top; curved/corner fit unsupported. proposed_design
|
|
Modeling sequence & review views
Record module authority
Keep card detail and contextual run distinct; preserve flat/curved discrepancy.
Gate: No compatibility inferred from name.
- docs/current-decisions.md
- production/assets/structures/PI-STR-0006-V01/REFERENCE_INDEX.csv
- production/assets/structures/PI-STR-0006-V01/VISUAL_NOTES.md
- production/districts/D02-CrownKey/planning/BUILD_REGISTER.csv
- production/handoffs/quik/2026-10-16/crown-landmark/R01/COORDINATION/PROTOCOL_SOURCES/Building_R05_GUIDE.md
- production/protocols/current.json
- production/protocols/district/R04/templates/CONNECTIONS.json
Block one bay
Separate arch, columns, canopy, wall, glazing, plinth and rail.
Gate: Review repeat vs end-cap components.
- docs/current-decisions.md
- production/assets/structures/PI-STR-0006-V01/REFERENCE_INDEX.csv
- production/assets/structures/PI-STR-0006-V01/VISUAL_NOTES.md
- production/districts/D02-CrownKey/planning/BUILD_REGISTER.csv
- production/handoffs/quik/2026-10-16/crown-landmark/R01/COORDINATION/PROTOCOL_SOURCES/Building_R05_GUIDE.md
- production/protocols/current.json
- production/protocols/district/R04/templates/CONNECTIONS.json
Define connector fields
Expose seams, glazing edge and plinth/canopy connectors; dimensions null.
Gate: No connector rule before measurement.
- docs/current-decisions.md
- production/assets/structures/PI-STR-0006-V01/REFERENCE_INDEX.csv
- production/assets/structures/PI-STR-0006-V01/VISUAL_NOTES.md
- production/districts/D02-CrownKey/planning/BUILD_REGISTER.csv
- production/handoffs/quik/2026-10-16/crown-landmark/R01/COORDINATION/PROTOCOL_SOURCES/Building_R05_GUIDE.md
- production/protocols/current.json
- production/protocols/district/R04/templates/CONNECTIONS.json
Test three relationships
Overlay with straight, curved and corner arcade without warping straight module.
Gate: Each compatibility result is explicit.
- docs/current-decisions.md
- production/assets/structures/PI-STR-0006-V01/REFERENCE_INDEX.csv
- production/assets/structures/PI-STR-0006-V01/VISUAL_NOTES.md
- production/districts/D02-CrownKey/planning/BUILD_REGISTER.csv
- production/handoffs/quik/2026-10-16/crown-landmark/R01/COORDINATION/PROTOCOL_SOURCES/Building_R05_GUIDE.md
- production/protocols/current.json
- production/protocols/district/R04/templates/CONNECTIONS.json
Package reuse evidence
Return module plan/section and seam sketches.
Gate: Unresolved kit remains candidate, not production-ready.
- docs/current-decisions.md
- production/assets/structures/PI-STR-0006-V01/REFERENCE_INDEX.csv
- production/assets/structures/PI-STR-0006-V01/VISUAL_NOTES.md
- production/districts/D02-CrownKey/planning/BUILD_REGISTER.csv
- production/handoffs/quik/2026-10-16/crown-landmark/R01/COORDINATION/PROTOCOL_SOURCES/Building_R05_GUIDE.md
- production/protocols/current.json
- production/protocols/district/R04/templates/CONNECTIONS.json
Required review views
Module front elevation
Show arch, flared columns, glazing and flat canopy.
- docs/current-decisions.md
- production/assets/structures/PI-STR-0006-V01/REFERENCE_INDEX.csv
- production/assets/structures/PI-STR-0006-V01/VISUAL_NOTES.md
- production/districts/D02-CrownKey/planning/BUILD_REGISTER.csv
- production/handoffs/quik/2026-10-16/crown-landmark/R01/COORDINATION/PROTOCOL_SOURCES/Building_R05_GUIDE.md
- production/protocols/current.json
- production/protocols/district/R04/templates/CONNECTIONS.json
Module plan
Show footprint, wall, plinth and connector edges.
- docs/current-decisions.md
- production/assets/structures/PI-STR-0006-V01/REFERENCE_INDEX.csv
- production/assets/structures/PI-STR-0006-V01/VISUAL_NOTES.md
- production/districts/D02-CrownKey/planning/BUILD_REGISTER.csv
- production/handoffs/quik/2026-10-16/crown-landmark/R01/COORDINATION/PROTOCOL_SOURCES/Building_R05_GUIDE.md
- production/protocols/current.json
- production/protocols/district/R04/templates/CONNECTIONS.json
Module section
Show canopy projection, glazing and plinth.
- docs/current-decisions.md
- production/assets/structures/PI-STR-0006-V01/REFERENCE_INDEX.csv
- production/assets/structures/PI-STR-0006-V01/VISUAL_NOTES.md
- production/districts/D02-CrownKey/planning/BUILD_REGISTER.csv
- production/handoffs/quik/2026-10-16/crown-landmark/R01/COORDINATION/PROTOCOL_SOURCES/Building_R05_GUIDE.md
- production/protocols/current.json
- production/protocols/district/R04/templates/CONNECTIONS.json
Variant seam comparison
Show straight/curved/corner interfaces and mismatches.
- docs/current-decisions.md
- production/assets/structures/PI-STR-0006-V01/REFERENCE_INDEX.csv
- production/assets/structures/PI-STR-0006-V01/VISUAL_NOTES.md
- production/districts/D02-CrownKey/planning/BUILD_REGISTER.csv
- production/handoffs/quik/2026-10-16/crown-landmark/R01/COORDINATION/PROTOCOL_SOURCES/Building_R05_GUIDE.md
- production/protocols/current.json
- production/protocols/district/R04/templates/CONNECTIONS.json
Shared kits & asset dependencies
Candidate kits
Proposed dependencies
- PI-BLD-0010-V01: Potential straight interface; flat canopy conflicts with flared building shell. (proposed)
- PI-BLD-0010-V02: No curved deformation evidence; separate interface may be needed. (proposed)
- PI-BLD-0010-V03: No corner turn shown; corner/end cap needs separate review. (proposed)
Decision queue & Friday return
Is flat canopy repeated or end cap?
Owner: Legend + Quik. Resolution evidence: Module-role decision and assembly sheet.
- docs/current-decisions.md
- production/assets/structures/PI-STR-0006-V01/ASSET_BRIEF.json
- production/assets/structures/PI-STR-0006-V01/BUILDING_DIMENSIONS.json
- production/assets/structures/PI-STR-0006-V01/REFERENCE_INDEX.csv
- production/assets/structures/PI-STR-0006-V01/VISUAL_NOTES.md
- production/districts/D02-CrownKey/planning/BUILD_REGISTER.csv
- production/handoffs/quik/2026-10-16/crown-landmark/R01/COORDINATION/PROTOCOL_SOURCES/Building_R05_GUIDE.md
- production/protocols/current.json
- production/protocols/district/R04/templates/CONNECTIONS.json
Do doors/glazing/plinth belong to module or building?
Owner: Quik. Resolution evidence: Component schedule and kit boundary.
- docs/current-decisions.md
- production/assets/structures/PI-STR-0006-V01/ASSET_BRIEF.json
- production/assets/structures/PI-STR-0006-V01/BUILDING_DIMENSIONS.json
- production/assets/structures/PI-STR-0006-V01/REFERENCE_INDEX.csv
- production/assets/structures/PI-STR-0006-V01/VISUAL_NOTES.md
- production/districts/D02-CrownKey/planning/BUILD_REGISTER.csv
- production/handoffs/quik/2026-10-16/crown-landmark/R01/COORDINATION/PROTOCOL_SOURCES/Building_R05_GUIDE.md
- production/protocols/current.json
- production/protocols/district/R04/templates/CONNECTIONS.json
What fits BLD-0010 V01/V02/V03?
Owner: Legend + Quik. Resolution evidence: Measured seam study for each variant.
- docs/current-decisions.md
- production/assets/structures/PI-STR-0006-V01/ASSET_BRIEF.json
- production/assets/structures/PI-STR-0006-V01/BUILDING_DIMENSIONS.json
- production/assets/structures/PI-STR-0006-V01/REFERENCE_INDEX.csv
- production/assets/structures/PI-STR-0006-V01/VISUAL_NOTES.md
- production/districts/D02-CrownKey/planning/BUILD_REGISTER.csv
- production/handoffs/quik/2026-10-16/crown-landmark/R01/COORDINATION/PROTOCOL_SOURCES/Building_R05_GUIDE.md
- production/protocols/current.json
- production/protocols/district/R04/templates/CONNECTIONS.json
What span/height/depth and connector rules apply?
Owner: Quik. Resolution evidence: Dimensioned spec from measurement, not pixels.
- docs/current-decisions.md
- production/assets/structures/PI-STR-0006-V01/ASSET_BRIEF.json
- production/assets/structures/PI-STR-0006-V01/BUILDING_DIMENSIONS.json
- production/assets/structures/PI-STR-0006-V01/REFERENCE_INDEX.csv
- production/assets/structures/PI-STR-0006-V01/VISUAL_NOTES.md
- production/districts/D02-CrownKey/planning/BUILD_REGISTER.csv
- production/handoffs/quik/2026-10-16/crown-landmark/R01/COORDINATION/PROTOCOL_SOURCES/Building_R05_GUIDE.md
- production/protocols/current.json
- production/protocols/district/R04/templates/CONNECTIONS.json
Friday: requires decision
- Repeat/end-cap role, kit boundary and fit with all arcade variants.
- Measured span/depth/connectors before reusable production geometry.
Friday: return evidence
- Editable single-bay candidate, not approved kit.
- Front/plan/section and three-way seam comparison.
- Compatible/incompatible/open interface list.
Downloads & source inventory
README and JSON retain repository-relative source paths. Use the linked inventory here when reviewing downloaded copies.
Source inventory
- docs/current-decisions.md
- production/assets/structures/PI-STR-0006-V01/ASSET_BRIEF.json
- production/assets/structures/PI-STR-0006-V01/BUILDING_DIMENSIONS.json
- production/assets/structures/PI-STR-0006-V01/REFERENCE_INDEX.csv
- production/assets/structures/PI-STR-0006-V01/VISUAL_NOTES.md
- production/districts/D02-CrownKey/planning/BUILD_REGISTER.csv
- production/districts/D02-CrownKey/planning/BUILD_REGISTER.json
- production/districts/D02-CrownKey/planning/prep/R01/ASSET_INPUTS_B.json
- production/districts/D02-CrownKey/planning/prep/R01/KIT_CATALOG.json
- production/handoffs/quik/2026-10-16/crown-landmark/R01/COORDINATION/PROTOCOL_SOURCES/Building_R05_GUIDE.md
- production/protocols/building/R05/README.md
- production/protocols/current.json
- production/protocols/district/R04/templates/CONNECTIONS.json
- production/protocols/district/R05/README.md
- production/workflows/spatial-imagery/R01/GUIDE.md
