New exterior candidate · R01
Open the model and drawings.
Proposed isolated geometry, four views from the same model, elevations, section and editable sources. Dimensions, shell acceptance, interiors and engine verification remain separate.
Exterior package and downloads →Draft production prep · R01 · 16 October 2026
Long Arcade
Prepare the P1 Tier B representative shop/cafe bay plus back-room/toilet/service candidate; keep this long straight shell distinct from curved/corner variants.
Current R02 scope requires a complete usable asset package. Design and isolated authoring can proceed; proposed dimensions, shell selection, site placement and actual engine checks retain explicit evidence status.
Current production program · R02
Exterior, usable spaces and a complete handoff.
Design a usable Long Arcade with Covered arrival and enclosed shop vestibule, Shop or cafe bay, Back room / service space, furnishings and connected access.
Required spaces
- Covered arrival and enclosed shop vestibule
- Shop or cafe bay
- Back room / service space
Required exterior coverage
- Full-building hero / silhouette
- Opposite or rear side
- Entrance at player-eye level
- Defining detail / building-to-ground interface
Required interior coverage
- Lobby wide and reverse / exit view
- Selected room 1 wide and reverse
- Selected room 2 wide and reverse, when commissioned
Delivery state: Scoped — complete design: not yet evidenced; reviewed build packet: not yet evidenced; engine verification: not yet evidenced.
Audited source baseline: Catalog/source preparation and starter records; no dedicated asset design pack, drawings or model identified.
Owner: OA2 (proposed seat assignment) · Independent reviewer: OA1-assigned independent read-only reviewer
Five-seat production plan and kickoff briefs → · Full current scope → · Download all31 programs
R02 supersedes conflicting shell-only or deferred-interior recommendations in the earlier preparation records below. Proposed room uses do not create new story canon; references do not establish completed geometry.
Prepare now
- Prepare one unscaled arch-bay rig with separate pier/glazing/canopy/passage.
- Draft one Tier B shop plan and repeat-seam checklist.

Preparation / not geometry
What Quik will build and review.
Component labels come from this asset’s prep record. This board is a task map, not a dimensional drawing.
- 01Straight arcade runsource notes
- 02Flared arch/piersource notes
- 03Shopfront/passagesource notes
- 04Gallery/roofsource notes
- 05Shop/cafe kitsource record
Modeling sequence
- 01Reconcile reference rolesNo detail until the source conflict is reviewed.
- 02Block one baySingle bay reviewed before repeat-run assembly.
- 03Set repeat/passage seamsMeasured rhythm/depth required before final layout.
- 04Fit Tier B shopOne dimensioned plan covers selected accessible bay.
- 05Compare STR-0006Compatibility or exclusion is recorded.
Planned review views
Components & scope evidence
Scope basis: Notes show straight repeated run, flared piers, arch openings, gallery and roof courts/pools, but card vs contextual render disagree on one/two arch tiers. Register asks for rhythm, covered passage and shop depth.
| Component | Role and evidence | Open questions |
|---|---|---|
| Straight arcade run | Long rectangular regular run; count/rhythm are unset. source_notes |
|
| Flared arch/pier | Pointed-round arch and flared piers; STR-0006 card has a flat canopy mismatch. source_notes |
|
| Shopfront/passage | Glazed shopfronts, warm light and possible recessed covered walk. source_notes |
|
| Gallery/roof | Glass gallery; second arch tier and roof courts/pools conflict with render. source_notes |
|
| Shop/cafe kit | One small enterable sample, back room, toilet and service route. source_record |
|
Modeling sequence & review views
Reconcile reference roles
Keep card and contextual render distinct; log arch-tier discrepancy.
Gate: No detail until the source conflict is reviewed.
- production/assets/buildings/PI-BLD-0010-V01/REFERENCE_INDEX.csv
- production/assets/buildings/PI-BLD-0010-V01/VISUAL_NOTES.md
- production/districts/D02-CrownKey/planning/BUILD_REGISTER.csv
- production/handoffs/quik/2026-10-16/crown-landmark/R01/COORDINATION/PROTOCOL_SOURCES/Building_R05_GUIDE.md
- production/protocols/current.json
Block one bay
Parameterize arch, pier, shopfront and canopy; no pixel-derived sizes.
Gate: Single bay reviewed before repeat-run assembly.
- production/assets/buildings/PI-BLD-0010-V01/REFERENCE_INDEX.csv
- production/assets/buildings/PI-BLD-0010-V01/VISUAL_NOTES.md
- production/districts/D02-CrownKey/planning/BUILD_REGISTER.csv
- production/handoffs/quik/2026-10-16/crown-landmark/R01/COORDINATION/PROTOCOL_SOURCES/Building_R05_GUIDE.md
- production/protocols/current.json
Set repeat/passage seams
Separate passage depth, gallery, end cap and bay seam.
Gate: Measured rhythm/depth required before final layout.
- production/assets/buildings/PI-BLD-0010-V01/REFERENCE_INDEX.csv
- production/assets/buildings/PI-BLD-0010-V01/VISUAL_NOTES.md
- production/districts/D02-CrownKey/planning/BUILD_REGISTER.csv
- production/handoffs/quik/2026-10-16/crown-landmark/R01/COORDINATION/PROTOCOL_SOURCES/Building_R05_GUIDE.md
- production/protocols/current.json
Fit Tier B shop
Plan one shop/cafe plus back room/toilet/service.
Gate: One dimensioned plan covers selected accessible bay.
- production/assets/buildings/PI-BLD-0010-V01/REFERENCE_INDEX.csv
- production/assets/buildings/PI-BLD-0010-V01/VISUAL_NOTES.md
- production/districts/D02-CrownKey/planning/BUILD_REGISTER.csv
- production/handoffs/quik/2026-10-16/crown-landmark/R01/COORDINATION/PROTOCOL_SOURCES/Building_R05_GUIDE.md
- production/protocols/current.json
Compare STR-0006
Test flat-top module without warping it into curved/flared arch.
Gate: Compatibility or exclusion is recorded.
- production/assets/buildings/PI-BLD-0010-V01/REFERENCE_INDEX.csv
- production/assets/buildings/PI-BLD-0010-V01/VISUAL_NOTES.md
- production/districts/D02-CrownKey/planning/BUILD_REGISTER.csv
- production/handoffs/quik/2026-10-16/crown-landmark/R01/COORDINATION/PROTOCOL_SOURCES/Building_R05_GUIDE.md
- production/protocols/current.json
Required review views
Straight front elevation
Show arch tiers, flared piers and rhythm.
- production/assets/buildings/PI-BLD-0010-V01/REFERENCE_INDEX.csv
- production/assets/buildings/PI-BLD-0010-V01/VISUAL_NOTES.md
- production/districts/D02-CrownKey/planning/BUILD_REGISTER.csv
- production/handoffs/quik/2026-10-16/crown-landmark/R01/COORDINATION/PROTOCOL_SOURCES/Building_R05_GUIDE.md
- production/protocols/current.json
One-bay/run plan
Show shop depth, passage and end conditions.
- production/assets/buildings/PI-BLD-0010-V01/REFERENCE_INDEX.csv
- production/assets/buildings/PI-BLD-0010-V01/VISUAL_NOTES.md
- production/districts/D02-CrownKey/planning/BUILD_REGISTER.csv
- production/handoffs/quik/2026-10-16/crown-landmark/R01/COORDINATION/PROTOCOL_SOURCES/Building_R05_GUIDE.md
- production/protocols/current.json
Bay section
Show canopy, walk, gallery and roof relationship.
- production/assets/buildings/PI-BLD-0010-V01/REFERENCE_INDEX.csv
- production/assets/buildings/PI-BLD-0010-V01/VISUAL_NOTES.md
- production/districts/D02-CrownKey/planning/BUILD_REGISTER.csv
- production/handoffs/quik/2026-10-16/crown-landmark/R01/COORDINATION/PROTOCOL_SOURCES/Building_R05_GUIDE.md
- production/protocols/current.json
Shop/service route
Show entry, sample bay, back room/toilet and staff route.
- production/assets/buildings/PI-BLD-0010-V01/REFERENCE_INDEX.csv
- production/assets/buildings/PI-BLD-0010-V01/VISUAL_NOTES.md
- production/districts/D02-CrownKey/planning/BUILD_REGISTER.csv
- production/handoffs/quik/2026-10-16/crown-landmark/R01/COORDINATION/PROTOCOL_SOURCES/Building_R05_GUIDE.md
- production/protocols/current.json
Shared kits & asset dependencies
Candidate kits
Proposed dependencies
- PI-STR-0006-V01: Potential straight interface only; module flat canopy conflicts with curved/flared building notes. (proposed)
- PI-BLD-0010-V02: Candidate shop kit only; curved shell must be independently fitted. (proposed)
- PI-BLD-0010-V03: Candidate shop kit only; corner module is distinct. (proposed)
Decision queue & Friday return
Does controlling view show one or two arch tiers?
Owner: Legend. Resolution evidence: Selected reference and marked elevation/section.
- production/assets/buildings/PI-BLD-0010-V01/ASSET_BRIEF.json
- production/assets/buildings/PI-BLD-0010-V01/BUILDING_DIMENSIONS.json
- production/assets/buildings/PI-BLD-0010-V01/REFERENCE_INDEX.csv
- production/assets/buildings/PI-BLD-0010-V01/VISUAL_NOTES.md
- production/districts/D02-CrownKey/planning/BUILD_REGISTER.csv
- production/handoffs/quik/2026-10-16/crown-landmark/R01/COORDINATION/PROTOCOL_SOURCES/Building_R05_GUIDE.md
- production/protocols/current.json
Does STR-0006 fit or only provide a related interface?
Owner: Legend + Quik. Resolution evidence: Side-by-side section and fit decision.
- production/assets/buildings/PI-BLD-0010-V01/ASSET_BRIEF.json
- production/assets/buildings/PI-BLD-0010-V01/BUILDING_DIMENSIONS.json
- production/assets/buildings/PI-BLD-0010-V01/REFERENCE_INDEX.csv
- production/assets/buildings/PI-BLD-0010-V01/VISUAL_NOTES.md
- production/districts/D02-CrownKey/planning/BUILD_REGISTER.csv
- production/handoffs/quik/2026-10-16/crown-landmark/R01/COORDINATION/PROTOCOL_SOURCES/Building_R05_GUIDE.md
- production/protocols/current.json
What are passage depth and repeat rhythm?
Owner: Quik. Resolution evidence: Measured plan/elevation and instance list.
- production/assets/buildings/PI-BLD-0010-V01/ASSET_BRIEF.json
- production/assets/buildings/PI-BLD-0010-V01/BUILDING_DIMENSIONS.json
- production/assets/buildings/PI-BLD-0010-V01/REFERENCE_INDEX.csv
- production/assets/buildings/PI-BLD-0010-V01/VISUAL_NOTES.md
- production/districts/D02-CrownKey/planning/BUILD_REGISTER.csv
- production/handoffs/quik/2026-10-16/crown-landmark/R01/COORDINATION/PROTOCOL_SOURCES/Building_R05_GUIDE.md
- production/protocols/current.json
What is roof use/access?
Owner: Legend. Resolution evidence: Roof plan and use/access decision.
- production/assets/buildings/PI-BLD-0010-V01/ASSET_BRIEF.json
- production/assets/buildings/PI-BLD-0010-V01/BUILDING_DIMENSIONS.json
- production/assets/buildings/PI-BLD-0010-V01/REFERENCE_INDEX.csv
- production/assets/buildings/PI-BLD-0010-V01/VISUAL_NOTES.md
- production/districts/D02-CrownKey/planning/BUILD_REGISTER.csv
- production/handoffs/quik/2026-10-16/crown-landmark/R01/COORDINATION/PROTOCOL_SOURCES/Building_R05_GUIDE.md
- production/protocols/current.json
Friday: requires decision
- Arch tier, STR-0006 fit, repeat rhythm, passage depth and roof use.
- Measured bay/envelope and selected sample program.
Friday: return evidence
- Editable single bay/run with actual values unset.
- Front/plan/section and shop/service route.
- Compatibility note prohibiting curved/corner stretch.
Downloads & source inventory
README and JSON retain repository-relative source paths. Use the linked inventory here when reviewing downloaded copies.
Source inventory
- docs/current-decisions.md
- production/assets/buildings/PI-BLD-0010-V01/ASSET_BRIEF.json
- production/assets/buildings/PI-BLD-0010-V01/BUILDING_DIMENSIONS.json
- production/assets/buildings/PI-BLD-0010-V01/REFERENCE_INDEX.csv
- production/assets/buildings/PI-BLD-0010-V01/VISUAL_NOTES.md
- production/districts/D02-CrownKey/planning/BUILD_REGISTER.csv
- production/districts/D02-CrownKey/planning/BUILD_REGISTER.json
- production/districts/D02-CrownKey/planning/prep/R01/ASSET_INPUTS_B.json
- production/districts/D02-CrownKey/planning/prep/R01/KIT_CATALOG.json
- production/handoffs/quik/2026-10-16/crown-landmark/R01/COORDINATION/PROTOCOL_SOURCES/Building_R05_GUIDE.md
- production/protocols/building/R05/README.md
- production/protocols/current.json
- production/protocols/district/R05/README.md
- production/workflows/spatial-imagery/R01/GUIDE.md
