# Crown Landmark · exterior shell candidate C02

**Asset:** PI-BLD-0001-V01 · **State:** CONCEPT CANDIDATE · **Date:** 16 October 2026

C02 is a new candidate beside the preserved C01 baseline (`../SHELL-C01/`, unchanged). It targets the three R06 reference differences that C01 left open: **flared rib blades, curved podium cantilevers and an upper-tower taper**. The original R06 artwork and the 81-room INT R02 layout are untouched. It is an isolated review asset; the district construction hold, creator visual approval, shell acceptance, placement, final scale and engine readiness are all still pending.

Evidence labels used everywhere in this package: **measured** (a result on the actual mesh), **proposed** (a builder choice such as the 1.2 m perimeter allowance, 0.6 m slab, rib widths), **interpreted** (a reading of R06 or of which enclosure governs a level; needs a recorded decision).

## What changed from C01

| Area | C01 | C02 |
|---|---|---|
| Rib cross-section | constant-width bar | flared blade: 16 m tangential at the foot, 10 m at +54 m, 7 m mid-tower, 10 m at the crown (proposed) |
| Rib path | piecewise | monotone smooth curve; authored foot/tip centres retained exactly |
| Podium edge | flat 0.9 m slab | 0.6 m slab with a curved `Cantilever_fascia_N` lip (2.3 m drop, 11 m reach; proposed) |
| Podium enclosure | glazing planes inset 18 m | explicit `Podium_wall_N` parts, with a front bay on tiers 1 and 2 |
| Tower profile | 68×54 m to +135 m, then 48×36 m at +216 m | smooth profile held ≥63.8×53.2 m through +135 m, then 40×30 m at +216 m |
| Occupied roof | 42×30 m | 36×26 m |
| Front recess | 3.0 m | 1.2 m |
| Atrium skin | continuous | stepped amber skin |

## Measured fit (all 81 rooms; details in `../FIT-COVERAGE/`)

- **75 FITS**, 5 INSIDE_BELOW_ALLOWANCE, 1 OUTSIDE_WALL_AND_DECK. (C01 baseline measured the same way: 70 / 3 / 1, plus 7 outside the C01 podium wall line.)
- L25/L26: all 32 tower rooms keep the proposed 1.2 m allowance; the three C01 L26 conflicts are resolved by the 1.2 m recess and the held profile.
- L00–L02: the five atrium/gallery rooms sit 0.4 m inside the front wall, below the proposed 1.2 m allowance.
- L03-RM001 (occupied day-use suite) lies outside the tier-2 wall line and deck outline (−3.6 m) and is crossed by `Rib_R1`.

## What C02 still does not do

- The silhouette is **still more columnar than the artwork**. The unchanged L25/L26 room blocks (60×40 m and 60×48 m) need the tower to stay near 63.8×53.2 m through +135 m, so the taper only begins there. The study `../SHELL-C02T/` (taper from +54 m) is **not a candidate**: it puts 16 of the 32 tower rooms outside the skin (−1.7 to −4.4 m).
- Podium arcades, crown ornament, amber glazing detail, UVs, collision and LODs are unfinished. Review components intersect; this is not a watertight construction shell.

## Decisions required (for Legend / Quik review — nothing was silently changed)

1. **Taper vs. L25/L26:** keep the rooms and the late taper (C02), or shrink/relocate the 60×40 and 60×48 m room blocks to allow a reference-style taper from +54 m.
2. **Tier 1 front:** the five atrium/gallery rooms need either a deeper deck 1 (≈107.6 m instead of 106 m to restore the 1.2 m allowance) or the atrium/galleries moved ≈0.8 m rearward.
3. **L03-RM001:** relocate the suite (≈4.8 m rearward to clear the tier-2 wall) *and* resolve the `Rib_R1` crossing (adjust R1's proposed intermediate controls, or trim/move the suite). Authored foot and tip centres must not move.
4. **Allowance:** the 1.2 m perimeter allowance and 0.6 m slab are proposals, not approved wall assemblies.

## Files

- `MODEL/*.glb`, `.obj`, `.mtl`: editable geometry (GLB: metres, Y up, front +Z; OBJ: metres, Z up, front −Y; keep OBJ and MTL together).
- `MODEL/VIEWS/`: six direct renders of the same mesh.
- `MODEL_SPEC.json`, `build_exterior.py`: parametric source. `python build_exterior.py --dir .` rebuilds the model and views.
- `audit_candidate.py`, `MODEL/FIT_REVIEW.json/.csv`: the C01-style L25/L26 audit run against C02.
- `MODEL/MODEL_MEASUREMENTS.json`, `MODEL/MODEL_MANIFEST.json`: actual mesh bounds, counts and hashes.
- `import_in_blender.py`: optional helper (supplied, not executed here).
- `PACKAGE_MANIFEST.json`, `verify_package.py`: checksums for this folder; run `python verify_package.py` after extraction.
