# Crown Landmark · exterior shell candidate C01

**Asset:** PI-BLD-0001-V01 · **State:** CONCEPT CANDIDATE · **Date:** 16 October 2026

One actual editable exterior model generated from Crown Landmark EXT R06's authored targets. The original R06/INT R02 packs remain unchanged. This is an isolated review asset; Quik's construction hold, creator visual approval, shell acceptance, placement and engine acceptance retain their separate status.

## Review this first

- The measured candidate has a 240 m height above finished ground and 160×120 m foundation. Its foundation soffit extends 1.2 m below that datum, so the full bounding-box height is 241.2 m.
- Three deck tops are+18/+36/+54 m at their source widths/depths. All six principal rib foot/tip centers follow the authored targets.
- The upper envelope is a proposal:68×54 m through+135 m, then 60×46 m at+180 m and 48×36 m at the nominal+216 m roof. It was not supplied as measured upper geometry by R06.
- Podium arches, wall/terrace setbacks, rib curves/cross-sections, the scalloped crown, amber glazing, facade grid, canopy and basins are C01 interpretations. Read `MODEL_SPEC.json` before treating them as instructions.
- The front/master and 02_Rear control the visual review. Camera calibration is unknown, so comparisons to the artwork are qualitative. The model is not an accepted visual match.

## Files

- `MODEL/*.glb`: portable editable geometry, named parts and review materials. Metres, standard glTF Y up; front is+Z. Importing into Blender restores its Z-up scene convention.
- `MODEL/*.obj` and matching `.mtl`: source-coordinate exchange mesh. Metres, Z up; front is−Y. Keep both files together.
- `MODEL/VIEWS/`: front/rear/left/right/true-overhead/elevated neutral renders of the same mesh. These are direct triangle renders, not generated concept images.
- `MODEL_SPEC.json` and `build_exterior.py`: editable parametric source, source hashes, proposed geometry and saved cameras. Rebuild with Python 3+NumPy; Pillow produces the labeled views. `--no-renders` exports geometry alone.
- `MODEL/MODEL_MEASUREMENTS.json`: component bounds and actual model counts.
- `audit_candidate.py`, `MODEL/FIT_REVIEW.json/.csv`: independent measurement and planning-rectangle containment review against the actual GLB/OBJ.
- `import_in_blender.py`: optional Blender helper to import this candidate into a separate scene, add the saved cameras and save a native `.blend`. This helper was supplied, not executed here. Blender/Unreal execution is not claimed.

## Known fit issues

The actual skin sections at+130.5 m and the source room ceiling plane must be checked against the unchanged L26 rooms. The current audit reports private office, secured records and private vestibule failing the proposed 1.2 m perimeter allowance. Use the exact margins and hashes in `FIT_REVIEW.json`; do not shrink those rooms silently. The other upper planning rectangles passing this limited check does not certify ribs, furniture, doors, core continuity or player/camera clearance.

## Differences to close

1. Match the broad sail-like rib faces and sculpted podium fascia more closely to the front/master. C01 is simplified massing.
2. Develop the amber atrium's layered glazing and lattice. Its current material and thin members are appearance placeholders.
3. Refine the interlocking crown and its junctions with the occupied roof. Intermediate curves and secondary ornaments are proposals.
4. Resolve the L26 perimeter conflicts by reviewing envelope/recess/structure and room layout together. Record any chosen change as a new revision.
5. Then review the complete core, playable spaces, topology, UVs/materials, collision, LODs, streaming and Unreal import in the actual project.

The internal roof/slab, glazing and some decoration are separate intersecting review components. This is not a watertight unified construction shell, furnished interior or ready-to-ship game asset.

## Reproduce

`python build_exterior.py` builds the model and six neutral views. Run `python audit_candidate.py` from this folder in the repo to resolve the canonical, unchanged interior layout and source references. The audit binds results to exact file hashes. The complete ZIP includes a `PACKAGE_MANIFEST.json`; verify it before review.

Technical export reference: [Khronos glTF 2.0](https://registry.khronos.org/glTF/specs/2.0/glTF-2.0.html). The browser viewer uses the same GLB, so part visibility and saved views do not generate a second building.
