{
  "asset_id": "PI-BLD-0013-V01",
  "purpose": "Prepare the Straight Tall envelope, facade-grid, core and typical-floor questions without legacy label or sibling-scale assumptions.",
  "scope_basis": "P2; proposed Tier C. Catalog concept only; no dedicated pack, placement, shell revision or engine evidence. Proposed scope is lobby, typical office/residential floor kit and service core; the register explicitly rejects legacy H/LM mapping by name.",
  "components": [
    {
      "name": "Straight envelope",
      "role": "The register names Tall/Slim as separate variants and requires their envelopes to be established.",
      "evidence_kind": "source_record",
      "source_paths": [
        "production/districts/D02-CrownKey/planning/BUILD_REGISTER.json"
      ],
      "open_questions": [
        "What authored evidence distinguishes this envelope from its sibling?"
      ]
    },
    {
      "name": "Facade grid",
      "role": "The facade grid is a specific coordination item; no module size is provided.",
      "evidence_kind": "source_record",
      "source_paths": [
        "production/districts/D02-CrownKey/planning/BUILD_REGISTER.json"
      ],
      "open_questions": [
        "What grid controls opening rhythm, room frontage and repeat bay boundaries?"
      ]
    },
    {
      "name": "Service core",
      "role": "Service core is included in the proposed program.",
      "evidence_kind": "source_record",
      "source_paths": [
        "production/districts/D02-CrownKey/planning/BUILD_REGISTER.json"
      ],
      "open_questions": [
        "What core location, access route and stack are supported by source plans?"
      ]
    },
    {
      "name": "Typical office/residential floor",
      "role": "A reusable office/residential floor kit is proposed but not yet selected.",
      "evidence_kind": "source_record",
      "source_paths": [
        "production/districts/D02-CrownKey/planning/BUILD_REGISTER.json"
      ],
      "open_questions": [
        "Which room arrangement and entry/core connection should be used as the first sample?"
      ]
    },
    {
      "name": "Lobby and appearance variation",
      "role": "Lobby is proposed; appearance changes may be separate from geometry only after compatibility review.",
      "evidence_kind": "proposed_design",
      "source_paths": [
        "production/districts/D02-CrownKey/planning/BUILD_REGISTER.json"
      ],
      "open_questions": [
        "Which finishes are cosmetic and which openings/core changes require geometry revision?"
      ]
    },
    {
      "name": "Straight Tall shaft and shallow stepped top",
      "role": "Notes describe a plain rectangular glass shaft with corner/face fins, shallow top step and larger-looking podium than Slim. Visible card bands are not a floor count.",
      "evidence_kind": "source_notes",
      "source_paths": [
        "production/districts/D02-CrownKey/planning/BUILD_REGISTER.json",
        "production/assets/buildings/PI-BLD-0013-V01/VISUAL_NOTES.md",
        "production/assets/buildings/PI-BLD-0013-V01/REFERENCE_INDEX.csv"
      ],
      "open_questions": [
        "Is the plan square or rectangular?",
        "Are fins structural, and what controls the top?"
      ]
    }
  ],
  "modeling_sequence": [
    {
      "step": 1,
      "title": "Preserve the quiet straight-tower expression",
      "action": "Use notes to distinguish Tall’s plain shaft and shallow stepped top from Slim’s upper setback; do not derive scale or floors from visible bands.",
      "gate": "No legacy H/LM mapping by name.",
      "source_paths": [
        "production/districts/D02-CrownKey/planning/BUILD_REGISTER.json",
        "production/assets/buildings/PI-BLD-0013-V01/VISUAL_NOTES.md",
        "production/assets/buildings/PI-BLD-0013-V01/REFERENCE_INDEX.csv"
      ]
    },
    {
      "step": 2,
      "title": "Establish envelope and facade grid",
      "action": "Prepare an annotated elevation/plan showing candidate grid, openings, core and shell boundary.",
      "gate": "Grid/envelope values stay unset until supported by a source and reviewed.",
      "source_paths": [
        "production/districts/D02-CrownKey/planning/BUILD_REGISTER.json",
        "production/protocols/building/R05/templates/BUILDING_DIMENSIONS.json"
      ]
    },
    {
      "step": 3,
      "title": "Plan typical floor and service core",
      "action": "Identify one reusable office/residential floor candidate and show its service-core connection.",
      "gate": "Room clear dimensions are measured after walls, structure, furniture and access are considered.",
      "source_paths": [
        "production/districts/D02-CrownKey/planning/BUILD_REGISTER.json",
        "production/protocols/building/R05/templates/ASSET_BRIEF_TEMPLATE.json",
        "production/protocols/building/R05/GUIDE.md"
      ]
    },
    {
      "step": 4,
      "title": "Compare sibling geometry and reuse",
      "action": "Compare this variant to its sibling and classify cosmetic versus geometry differences.",
      "gate": "Do not scale one shell to create the other; footprint/core/opening changes require explicit variant/revision review.",
      "source_paths": [
        "production/districts/D02-CrownKey/planning/BUILD_REGISTER.json",
        "production/protocols/building/R05/GUIDE.md"
      ]
    },
    {
      "step": 5,
      "title": "Return scope and measurement requests",
      "action": "Provide the selected view/plan/section list and unresolved envelope, grid, core and enterability questions.",
      "gate": "No shell approval or placement without measured/reviewed inputs.",
      "source_paths": [
        "production/districts/D02-CrownKey/planning/BUILD_REGISTER.json",
        "production/protocols/building/R05/templates/BUILDING_DIMENSIONS.json",
        "production/protocols/building/R05/GUIDE.md"
      ]
    }
  ],
  "required_views": [
    {
      "view": "Straight Tall elevation",
      "purpose": "Show shaft, facade fins, shallow stepped top and podium relationship from selected front.",
      "source_paths": [
        "production/districts/D02-CrownKey/planning/BUILD_REGISTER.json",
        "production/assets/buildings/PI-BLD-0013-V01/VISUAL_NOTES.md",
        "production/assets/buildings/PI-BLD-0013-V01/REFERENCE_INDEX.csv"
      ]
    },
    {
      "view": "Typical-floor plan",
      "purpose": "Show a representative office/residential kit, core and usable facade frontage.",
      "source_paths": [
        "production/districts/D02-CrownKey/planning/BUILD_REGISTER.json",
        "production/protocols/building/R05/templates/ASSET_BRIEF_TEMPLATE.json"
      ]
    },
    {
      "view": "Core/facade vertical section",
      "purpose": "Expose repeated floor relationship and service-core continuity without assigning a floor count.",
      "source_paths": [
        "production/districts/D02-CrownKey/planning/BUILD_REGISTER.json",
        "production/protocols/building/R05/templates/BUILDING_DIMENSIONS.json"
      ]
    },
    {
      "view": "Lobby-to-typical-floor route",
      "purpose": "Check entrance, lobby, core and representative room connection once enterability is selected.",
      "source_paths": [
        "production/districts/D02-CrownKey/planning/BUILD_REGISTER.json",
        "production/protocols/building/R05/GUIDE.md"
      ]
    }
  ],
  "candidate_kit_ids": [
    "CK-KIT-LOBBY",
    "CK-KIT-CORE",
    "CK-KIT-OFFICE",
    "CK-KIT-RESIDENCE",
    "CK-KIT-SERVICE"
  ],
  "dependencies": [
    {
      "asset_id": "PI-BLD-0013-V02",
      "relationship": "Sibling-variant comparison only; register requires distinct Tall/Slim envelope and facade-grid definition.",
      "status": "proposed",
      "source_paths": [
        "production/districts/D02-CrownKey/planning/BUILD_REGISTER.json",
        "production/assets/buildings/PI-BLD-0013-V01/VISUAL_NOTES.md",
        "production/assets/buildings/PI-BLD-0013-V02/VISUAL_NOTES.md"
      ]
    }
  ],
  "decision_queue": [
    {
      "question": "What plan shape and top treatment control Tall, and are its fins structural or applied?",
      "owner": "Legend with design/layout author",
      "resolution_evidence": "Selected reference authority plus annotated plan/elevation/section.",
      "source_paths": [
        "production/districts/D02-CrownKey/planning/BUILD_REGISTER.json",
        "production/assets/buildings/PI-BLD-0013-V01/VISUAL_NOTES.md",
        "production/assets/buildings/PI-BLD-0013-V01/REFERENCE_INDEX.csv"
      ]
    },
    {
      "question": "Which typical office/residential kit and lobby enterability are selected for the first sample?",
      "owner": "Legend",
      "resolution_evidence": "Asset brief scope plus a representative plan and room schedule.",
      "source_paths": [
        "production/districts/D02-CrownKey/planning/BUILD_REGISTER.json",
        "production/protocols/building/R05/templates/ASSET_BRIEF_TEMPLATE.json",
        "production/protocols/building/R05/GUIDE.md"
      ]
    },
    {
      "question": "Which differences are cosmetic, and which require a geometry variant or shell revision?",
      "owner": "Legend with design/layout author",
      "resolution_evidence": "R05 reuse record tied to the actual geometry/opening/core comparison.",
      "source_paths": [
        "production/districts/D02-CrownKey/planning/BUILD_REGISTER.json",
        "production/protocols/building/R05/GUIDE.md"
      ]
    },
    {
      "question": "How will legacy H/LM labels be handled without implying identity or scale?",
      "owner": "Legend / catalog owner",
      "resolution_evidence": "Source-backed crosswalk or explicit unresolved status; no name-only mapping.",
      "source_paths": [
        "production/districts/D02-CrownKey/planning/BUILD_REGISTER.json",
        "production/districts/D02-CrownKey/planning/README.md"
      ]
    }
  ],
  "friday_work": {
    "can_prepare": [
      "Compare the plain Tall shaft/shallow top to Slim’s setback and record front, plan-shape and facade-fin questions.",
      "List facade-grid, opening, core and typical-floor questions plus the first drawing set needed."
    ],
    "requires_decision": [
      "Legend review of controlling references, selected enterability and the variant geometry boundary.",
      "Sourced/reviewed envelope and facade grid before shell dimensions or reusable geometry are locked."
    ],
    "return_evidence": [
      "Variant-specific annotated elevation, floor plan and section with reference provenance and open dimensions.",
      "R05 reuse comparison recording which parts are genuinely shared and which are asset-specific."
    ]
  },
  "schema_version": 1,
  "revision": "R01",
  "date": "2026-10-16",
  "status": "DRAFT_PRODUCTION_PREP",
  "status_notice": "Draft preparation only; not an issued reference pack, shell, approval or construction release. Foundation hold remains in force; preparation does not authorize construction or accept dimensions, placement or engine readiness.",
  "name": "Straight Tall",
  "kind": "building",
  "priority": "P2",
  "protocol_revisions": {
    "building": "R05",
    "district": "R05",
    "spatial_imagery": "R01"
  },
  "source_main_commit": "8e9c5949400a528e0e16274e137653584a5560eb",
  "register_tasks": [
    {
      "id": "PI-BLD-0013-V01-01",
      "work": "Confirm parcel/placement and controlling exterior references; reconcile current UE state",
      "status": "pending"
    },
    {
      "id": "PI-BLD-0013-V01-02",
      "work": "Approve envelope, levels, core and dimensions; record scale source and exceptions",
      "status": "pending"
    },
    {
      "id": "PI-BLD-0013-V01-03",
      "work": "Issue dimensioned site/ground/roof plans, distinct-floor plans and necessary sections",
      "status": "pending"
    },
    {
      "id": "PI-BLD-0013-V01-04",
      "work": "Establish envelope and facade grid for tall and slim variants; no legacy H/LM mapping by name.",
      "status": "pending"
    },
    {
      "id": "PI-BLD-0013-V01-05",
      "work": "Select enterability and implement only the approved room/kit program: Lobby, typical office/residential floor kit, service core",
      "status": "candidate_scope"
    },
    {
      "id": "PI-BLD-0013-V01-06",
      "work": "Review shell fit and a furnished/player-camera sample; derive actual window/site views",
      "status": "pending"
    },
    {
      "id": "PI-BLD-0013-V01-07",
      "work": "Verify collision, navigation, access, streaming, materials and performance; issue manifest and current commit evidence",
      "status": "pending"
    }
  ],
  "authoritative_dimension_contract": "production/assets/buildings/PI-BLD-0013-V01/BUILDING_DIMENSIONS.json",
  "dimensions_status": "unset",
  "input_record": {
    "asset_id": "PI-BLD-0013-V01",
    "purpose": "Prepare the Straight Tall envelope, facade-grid, core and typical-floor questions without legacy label or sibling-scale assumptions.",
    "scope_basis": "P2; proposed Tier C. Catalog concept only; no dedicated pack, placement, shell revision or engine evidence. Proposed scope is lobby, typical office/residential floor kit and service core; the register explicitly rejects legacy H/LM mapping by name.",
    "components": [
      {
        "name": "Straight envelope",
        "role": "The register names Tall/Slim as separate variants and requires their envelopes to be established.",
        "evidence_kind": "source_record",
        "source_paths": [
          "production/districts/D02-CrownKey/planning/BUILD_REGISTER.json"
        ],
        "open_questions": [
          "What authored evidence distinguishes this envelope from its sibling?"
        ]
      },
      {
        "name": "Facade grid",
        "role": "The facade grid is a specific coordination item; no module size is provided.",
        "evidence_kind": "source_record",
        "source_paths": [
          "production/districts/D02-CrownKey/planning/BUILD_REGISTER.json"
        ],
        "open_questions": [
          "What grid controls opening rhythm, room frontage and repeat bay boundaries?"
        ]
      },
      {
        "name": "Service core",
        "role": "Service core is included in the proposed program.",
        "evidence_kind": "source_record",
        "source_paths": [
          "production/districts/D02-CrownKey/planning/BUILD_REGISTER.json"
        ],
        "open_questions": [
          "What core location, access route and stack are supported by source plans?"
        ]
      },
      {
        "name": "Typical office/residential floor",
        "role": "A reusable office/residential floor kit is proposed but not yet selected.",
        "evidence_kind": "source_record",
        "source_paths": [
          "production/districts/D02-CrownKey/planning/BUILD_REGISTER.json"
        ],
        "open_questions": [
          "Which room arrangement and entry/core connection should be used as the first sample?"
        ]
      },
      {
        "name": "Lobby and appearance variation",
        "role": "Lobby is proposed; appearance changes may be separate from geometry only after compatibility review.",
        "evidence_kind": "proposed_design",
        "source_paths": [
          "production/districts/D02-CrownKey/planning/BUILD_REGISTER.json"
        ],
        "open_questions": [
          "Which finishes are cosmetic and which openings/core changes require geometry revision?"
        ]
      },
      {
        "name": "Straight Tall shaft and shallow stepped top",
        "role": "Notes describe a plain rectangular glass shaft with corner/face fins, shallow top step and larger-looking podium than Slim. Visible card bands are not a floor count.",
        "evidence_kind": "source_notes",
        "source_paths": [
          "production/districts/D02-CrownKey/planning/BUILD_REGISTER.json",
          "production/assets/buildings/PI-BLD-0013-V01/VISUAL_NOTES.md",
          "production/assets/buildings/PI-BLD-0013-V01/REFERENCE_INDEX.csv"
        ],
        "open_questions": [
          "Is the plan square or rectangular?",
          "Are fins structural, and what controls the top?"
        ]
      }
    ],
    "modeling_sequence": [
      {
        "step": 1,
        "title": "Preserve the quiet straight-tower expression",
        "action": "Use notes to distinguish Tall’s plain shaft and shallow stepped top from Slim’s upper setback; do not derive scale or floors from visible bands.",
        "gate": "No legacy H/LM mapping by name.",
        "source_paths": [
          "production/districts/D02-CrownKey/planning/BUILD_REGISTER.json",
          "production/assets/buildings/PI-BLD-0013-V01/VISUAL_NOTES.md",
          "production/assets/buildings/PI-BLD-0013-V01/REFERENCE_INDEX.csv"
        ]
      },
      {
        "step": 2,
        "title": "Establish envelope and facade grid",
        "action": "Prepare an annotated elevation/plan showing candidate grid, openings, core and shell boundary.",
        "gate": "Grid/envelope values stay unset until supported by a source and reviewed.",
        "source_paths": [
          "production/districts/D02-CrownKey/planning/BUILD_REGISTER.json",
          "production/protocols/building/R05/templates/BUILDING_DIMENSIONS.json"
        ]
      },
      {
        "step": 3,
        "title": "Plan typical floor and service core",
        "action": "Identify one reusable office/residential floor candidate and show its service-core connection.",
        "gate": "Room clear dimensions are measured after walls, structure, furniture and access are considered.",
        "source_paths": [
          "production/districts/D02-CrownKey/planning/BUILD_REGISTER.json",
          "production/protocols/building/R05/templates/ASSET_BRIEF_TEMPLATE.json",
          "production/protocols/building/R05/GUIDE.md"
        ]
      },
      {
        "step": 4,
        "title": "Compare sibling geometry and reuse",
        "action": "Compare this variant to its sibling and classify cosmetic versus geometry differences.",
        "gate": "Do not scale one shell to create the other; footprint/core/opening changes require explicit variant/revision review.",
        "source_paths": [
          "production/districts/D02-CrownKey/planning/BUILD_REGISTER.json",
          "production/protocols/building/R05/GUIDE.md"
        ]
      },
      {
        "step": 5,
        "title": "Return scope and measurement requests",
        "action": "Provide the selected view/plan/section list and unresolved envelope, grid, core and enterability questions.",
        "gate": "No shell approval or placement without measured/reviewed inputs.",
        "source_paths": [
          "production/districts/D02-CrownKey/planning/BUILD_REGISTER.json",
          "production/protocols/building/R05/templates/BUILDING_DIMENSIONS.json",
          "production/protocols/building/R05/GUIDE.md"
        ]
      }
    ],
    "required_views": [
      {
        "view": "Straight Tall elevation",
        "purpose": "Show shaft, facade fins, shallow stepped top and podium relationship from selected front.",
        "source_paths": [
          "production/districts/D02-CrownKey/planning/BUILD_REGISTER.json",
          "production/assets/buildings/PI-BLD-0013-V01/VISUAL_NOTES.md",
          "production/assets/buildings/PI-BLD-0013-V01/REFERENCE_INDEX.csv"
        ]
      },
      {
        "view": "Typical-floor plan",
        "purpose": "Show a representative office/residential kit, core and usable facade frontage.",
        "source_paths": [
          "production/districts/D02-CrownKey/planning/BUILD_REGISTER.json",
          "production/protocols/building/R05/templates/ASSET_BRIEF_TEMPLATE.json"
        ]
      },
      {
        "view": "Core/facade vertical section",
        "purpose": "Expose repeated floor relationship and service-core continuity without assigning a floor count.",
        "source_paths": [
          "production/districts/D02-CrownKey/planning/BUILD_REGISTER.json",
          "production/protocols/building/R05/templates/BUILDING_DIMENSIONS.json"
        ]
      },
      {
        "view": "Lobby-to-typical-floor route",
        "purpose": "Check entrance, lobby, core and representative room connection once enterability is selected.",
        "source_paths": [
          "production/districts/D02-CrownKey/planning/BUILD_REGISTER.json",
          "production/protocols/building/R05/GUIDE.md"
        ]
      }
    ],
    "candidate_kit_ids": [
      "CK-KIT-LOBBY",
      "CK-KIT-CORE",
      "CK-KIT-OFFICE",
      "CK-KIT-RESIDENCE",
      "CK-KIT-SERVICE"
    ],
    "dependencies": [
      {
        "asset_id": "PI-BLD-0013-V02",
        "relationship": "Sibling-variant comparison only; register requires distinct Tall/Slim envelope and facade-grid definition.",
        "status": "proposed",
        "source_paths": [
          "production/districts/D02-CrownKey/planning/BUILD_REGISTER.json",
          "production/assets/buildings/PI-BLD-0013-V01/VISUAL_NOTES.md",
          "production/assets/buildings/PI-BLD-0013-V02/VISUAL_NOTES.md"
        ]
      }
    ],
    "decision_queue": [
      {
        "question": "What plan shape and top treatment control Tall, and are its fins structural or applied?",
        "owner": "Legend with design/layout author",
        "resolution_evidence": "Selected reference authority plus annotated plan/elevation/section.",
        "source_paths": [
          "production/districts/D02-CrownKey/planning/BUILD_REGISTER.json",
          "production/assets/buildings/PI-BLD-0013-V01/VISUAL_NOTES.md",
          "production/assets/buildings/PI-BLD-0013-V01/REFERENCE_INDEX.csv"
        ]
      },
      {
        "question": "Which typical office/residential kit and lobby enterability are selected for the first sample?",
        "owner": "Legend",
        "resolution_evidence": "Asset brief scope plus a representative plan and room schedule.",
        "source_paths": [
          "production/districts/D02-CrownKey/planning/BUILD_REGISTER.json",
          "production/protocols/building/R05/templates/ASSET_BRIEF_TEMPLATE.json",
          "production/protocols/building/R05/GUIDE.md"
        ]
      },
      {
        "question": "Which differences are cosmetic, and which require a geometry variant or shell revision?",
        "owner": "Legend with design/layout author",
        "resolution_evidence": "R05 reuse record tied to the actual geometry/opening/core comparison.",
        "source_paths": [
          "production/districts/D02-CrownKey/planning/BUILD_REGISTER.json",
          "production/protocols/building/R05/GUIDE.md"
        ]
      },
      {
        "question": "How will legacy H/LM labels be handled without implying identity or scale?",
        "owner": "Legend / catalog owner",
        "resolution_evidence": "Source-backed crosswalk or explicit unresolved status; no name-only mapping.",
        "source_paths": [
          "production/districts/D02-CrownKey/planning/BUILD_REGISTER.json",
          "production/districts/D02-CrownKey/planning/README.md"
        ]
      }
    ],
    "friday_work": {
      "can_prepare": [
        "Compare the plain Tall shaft/shallow top to Slim’s setback and record front, plan-shape and facade-fin questions.",
        "List facade-grid, opening, core and typical-floor questions plus the first drawing set needed."
      ],
      "requires_decision": [
        "Legend review of controlling references, selected enterability and the variant geometry boundary.",
        "Sourced/reviewed envelope and facade grid before shell dimensions or reusable geometry are locked."
      ],
      "return_evidence": [
        "Variant-specific annotated elevation, floor plan and section with reference provenance and open dimensions.",
        "R05 reuse comparison recording which parts are genuinely shared and which are asset-specific."
      ]
    }
  },
  "source_hash_inventory": [
    {
      "path": "docs/current-decisions.md",
      "sha256": "8001f9a1c613b326b030da3ace10947a3021dc12f9273b7c7fa46d0ade10d382"
    },
    {
      "path": "production/assets/buildings/PI-BLD-0013-V01/BUILDING_DIMENSIONS.json",
      "sha256": "b6814b6de0492fd629301aa252784f18bf3ef7e03aa25a562cc1cea50c1c94de"
    },
    {
      "path": "production/assets/buildings/PI-BLD-0013-V01/REFERENCE_INDEX.csv",
      "sha256": "78c6bede0ef76fd622045e1a4add911b6a41254a5a5645cfd035767c7ebc7482"
    },
    {
      "path": "production/assets/buildings/PI-BLD-0013-V01/VISUAL_NOTES.md",
      "sha256": "fb3928c2b5aa7b96748fcf52c06227019ef29b5510589793767e4fdc6aac087d"
    },
    {
      "path": "production/assets/buildings/PI-BLD-0013-V02/VISUAL_NOTES.md",
      "sha256": "4ba837708785502a42ecafe17398c336e48f9641430c962552599c2554ad2867"
    },
    {
      "path": "production/districts/D02-CrownKey/planning/BUILD_REGISTER.json",
      "sha256": "bb0a893c54a83f490e9ff59197e593ea1093a393209c7714d57997cd3c06df3e"
    },
    {
      "path": "production/districts/D02-CrownKey/planning/README.md",
      "sha256": "1367a53f00d00c42b2f39482b9e75693d332fb9394d5582dcea2dd14d65c4b2a"
    },
    {
      "path": "production/districts/D02-CrownKey/planning/prep/R01/ASSET_INPUTS_A.json",
      "sha256": "8193933c210b0cfaa825428aae1a0d1d2b2fbe8f11d6c7befc0db81d7892d2d4"
    },
    {
      "path": "production/districts/D02-CrownKey/planning/prep/R01/KIT_CATALOG.json",
      "sha256": "52525e0754aee464c84793b3b3cfe2b6ae4c95981fd2bf3e67c2d91c02ada0b9"
    },
    {
      "path": "production/protocols/building/R05/GUIDE.md",
      "sha256": "006818490740b4bd9e3994a428da95390f9f4dd987c6fd6f67a8dd1dbbc24509"
    },
    {
      "path": "production/protocols/building/R05/README.md",
      "sha256": "ecb4c6b0bf144a5da037ba8817528c40cb59ce272bc9ca63b3d187e704dc2715"
    },
    {
      "path": "production/protocols/building/R05/templates/ASSET_BRIEF_TEMPLATE.json",
      "sha256": "d6f80614e4f7d87f7cd569c7b1320cf6ad58c2021fab1955ff274a157d8df054"
    },
    {
      "path": "production/protocols/building/R05/templates/BUILDING_DIMENSIONS.json",
      "sha256": "46fefd72cb9e5bd0b1e98822a1773401f96c35d91ce57fc821d3bbc624e69631"
    },
    {
      "path": "production/protocols/current.json",
      "sha256": "c7be63113d117523e6b2e608149e6b31620f2f50436f4fbbeebdd1ffb005881a"
    },
    {
      "path": "production/protocols/district/R05/README.md",
      "sha256": "f95ad3a6c25f181898fd3be47eac800b39b5f1790387f8e93d5450e75ace5a7d"
    },
    {
      "path": "production/workflows/spatial-imagery/R01/GUIDE.md",
      "sha256": "288df4dc11896d4e606f8dc49f8b1a6969679d1fad50fad7595f3e2c8b9ad173"
    }
  ]
}
