# PI-BLD-0010-V03 · Corner Arcade · preparation R01

**DRAFT_PRODUCTION_PREP** · 2026-10-16

Draft preparation only; not an issued reference pack, shell, approval or construction release. Foundation hold remains in force; preparation does not authorize construction or accept dimensions, placement or engine readiness.

Prepare the P1 Tier B representative shop/cafe bay and distinct L-turn shell; keep corner bay/end cap and roof pavilion variant-specific.

## Scope basis

Notes show two arcade faces meeting at an obscured corner, with gallery and rooftop glazed pavilion. V01 is straight, V02 curved; neither provides a validated corner module.

## Components

| Component | Role | Evidence | Open questions |
|---|---|---|---|
| L-shaped mass | Two faces turn; leg lengths and inner-side enclosure are unknown. | source_notes | Are legs equal and is inner side open courtyard or closed? |
| Corner arch/pier | Possible wide rounded arch, diagonal arch or paired arches at flared pier. | source_notes | Which treatment controls and how does rhythm continue? |
| Gallery/passage turn | Gallery and possible covered passage may continue around corner. | source_notes | Does passage remain continuous/protected at turn? |
| Roof pavilion | Low glazed roof volume with rounded end and terrace. | source_notes | Is it enterable and how is it reached? |
| Shop/service bay | One representative shop/cafe with back room/toilet/service. | source_record | Where does sample bay sit relative to corner and staff route? |

## Modeling sequence

1. **Resolve corner options** — Diagram wide arch, diagonal arch or paired arches; don't infer from obscured view. Gate: Legend selects corner language before detail.
2. **Block legs/cap** — Keep two legs, corner/end cap and repeat seams separate. Gate: Plan shows continuity without hidden gaps.
3. **Test passage/shop** — Check turn and one sample shop/service route. Gate: Measured plan captures corner clearance.
4. **Fit roof pavilion** — Keep pavilion/terrace separate; show access only as a proposal. Gate: Enterability is decided before interior model.
5. **Compare interfaces** — Use straight module only on straight legs; no warping at corner. Gate: Any new corner piece is named and reviewed.

## Required review views

- **Corner axon** — Show both faces, corner treatment, gallery and roof volume.
- **L-plan** — Show leg lengths, inner side and passage continuity.
- **Corner section/elevation** — Show arch/pier alternatives as unresolved.
- **Shop/roof route** — Show sample shop and candidate roof access.

## Candidate kits

- CK-KIT-ARCADE-CORNER
- CK-KIT-SHOP-CAFE
- CK-KIT-SERVICE
- CK-KIT-PROPS

## Proposed dependencies

- PI-STR-0006-V01: Potential straight-leg interface only; no corner turn shown. (proposed)
- PI-BLD-0010-V01: Candidate shop kit only; corner/end cap remains unique. (proposed)
- PI-BLD-0010-V02: Candidate storefront principles only; L-turn is distinct from curve. (proposed)

## Decision queue

- Is corner one arch, diagonal arch or paired arches/pier? Owner: Legend. Resolution evidence: Chosen sketch and same-model view..
- How many bays per leg and is inner side open? Owner: Legend + Quik. Resolution evidence: Dimensioned plan and repeat schedule..
- Does passage cover turn and is roof pavilion accessible? Owner: Legend + Quik. Resolution evidence: Route plan/section and access decision..
- Which straight parts reuse without deformation? Owner: Quik. Resolution evidence: Seam test and compatible/excluded list..

## Friday: can prepare

- Prepare L-leg/corner-cap control geometry with widths/angle unset.
- Lay out one shop module and roof-pavilion access question.

## Friday: requires decision

- Corner arch/pier, leg lengths, inner side, passage and pavilion access.
- Measured plan/clearance before repeat or fit claims.

## Friday: return evidence

- Editable L-run with corner options named.
- L-plan, corner section and route/pavilion diagram.
- Reuse note excluding unverified corner fit.

## Controlling records and source inventory

- Dimension contract: [BUILDING_DIMENSIONS.json](../../BUILDING_DIMENSIONS.json).
- Building R05 / District R05 / Spatial Imagery R01; dimensions and approval remain governed by their own records.
- [current-decisions.md](../../../../../../docs/current-decisions.md) · SHA-256 `8001f9a1c613b326b030da3ace10947a3021dc12f9273b7c7fa46d0ade10d382`
- [ASSET_BRIEF.json](../../ASSET_BRIEF.json) · SHA-256 `757ca31d9e4beba7a51cf84c15e981009d1f70574e5020a50a71b2dd87c57305`
- [BUILDING_DIMENSIONS.json](../../BUILDING_DIMENSIONS.json) · SHA-256 `0cf470d70a787db4fa5bcef0146b1c2db6ac75314d80e43fcffa9da894f251aa`
- [REFERENCE_INDEX.csv](../../REFERENCE_INDEX.csv) · SHA-256 `992407ecd3d392a381d4848c09e4fa74f83489b8a6967ee513d139078db40b3f`
- [VISUAL_NOTES.md](../../VISUAL_NOTES.md) · SHA-256 `1b44b3d4715b928eb4f6be23d0d93b728ac22e2841b7682d7a575344c7b9bbe2`
- [BUILD_REGISTER.csv](../../../../../districts/D02-CrownKey/planning/BUILD_REGISTER.csv) · SHA-256 `45be2626767273dce204c95a1233c943cdcdc119fce7a17eda4810c3606a0d52`
- [BUILD_REGISTER.json](../../../../../districts/D02-CrownKey/planning/BUILD_REGISTER.json) · SHA-256 `bb0a893c54a83f490e9ff59197e593ea1093a393209c7714d57997cd3c06df3e`
- [ASSET_INPUTS_B.json](../../../../../districts/D02-CrownKey/planning/prep/R01/ASSET_INPUTS_B.json) · SHA-256 `13b830ec89a557291c006de40e75574fa3be9cb844bb5c021f978e1a021d2698`
- [KIT_CATALOG.json](../../../../../districts/D02-CrownKey/planning/prep/R01/KIT_CATALOG.json) · SHA-256 `52525e0754aee464c84793b3b3cfe2b6ae4c95981fd2bf3e67c2d91c02ada0b9`
- [Building_R05_GUIDE.md](../../../../../handoffs/quik/2026-10-16/crown-landmark/R01/COORDINATION/PROTOCOL_SOURCES/Building_R05_GUIDE.md) · SHA-256 `006818490740b4bd9e3994a428da95390f9f4dd987c6fd6f67a8dd1dbbc24509`
- [README.md](../../../../../protocols/building/R05/README.md) · SHA-256 `ecb4c6b0bf144a5da037ba8817528c40cb59ce272bc9ca63b3d187e704dc2715`
- [current.json](../../../../../protocols/current.json) · SHA-256 `c7be63113d117523e6b2e608149e6b31620f2f50436f4fbbeebdd1ffb005881a`
- [README.md](../../../../../protocols/district/R05/README.md) · SHA-256 `f95ad3a6c25f181898fd3be47eac800b39b5f1790387f8e93d5450e75ace5a7d`
- [GUIDE.md](../../../../../workflows/spatial-imagery/R01/GUIDE.md) · SHA-256 `288df4dc11896d4e606f8dc49f8b1a6969679d1fad50fad7595f3e2c8b9ad173`
