# Courtyard Offices · exterior candidate R01

`PI-BLD-0007-V01` · Marley / Codex / delegated exterior_gardens · observed main `c887e995a44f6871c425893eead518abe0900fa6`.

**Editable proposed exterior geometry, not a reviewed build-ready or engine-ready building.** This packet completes a distinct exterior study for review; it does not close the larger lobby-plus-rooms program. Publication does not approve scale, shell, placement or canon.

Four rounded perimeter wings enclose an open-to-sky courtyard; lower front and taller side/rear wings; two proposed ground portals connect street to court. All dimensions and unseen geometry are author proposals, not extracted measurements. Exterior study only; no accepted shell or engine evidence.

## Start the Blender build

1. Read `SOURCE_AND_DISCREPANCIES.json`, `BUILDING_DIMENSIONS.json` and the source-card view. Preserve issued source artwork and all existing Crown/Quik work.
2. Use the batch's reproducible generator on `model.json` to export OBJ/MTL, GLB, saved cameras and same-model views. Use the supplied Blender script where generated; run it in a separate Blender scene. Metres, Z up, front −Y, origin at the proposed ground centre; object scale 1.
3. Group components by their existing names (`L00`, level/wing, frame, terrace, glazing and planting proxy); preserve the open voids and entrance gaps. Do not replace the geometry with a solid scaled sibling mass.
4. Review front, reverse, entrance and defining detail from the same model before refining curvature, joins, glazing, drainage and structural interfaces. Read the exact discrepancies below.
5. Return fresh native `.blend`, GLB, model manifest, saved cameras, model/scale review evidence and residual defects. Only then assign the separate interior-fit/furnishing and eventual Unreal work. No overnight autonomy beyond the user's authorized scope is implied by this file.

## Candidate dimensions and interfaces

Primary massing proposal (accessories and below-ground slab depth are included separately in generated `QA.json` bounds): **64 × 52 × 20.8 m**, 5 authored levels/tiers including roof boxes where stated. These are new proposed dimensions; source artwork has no metric calibration. `BUILDING_DIMENSIONS.json` records floor elevations, entrance and special geometry. Site frame/core/structure/accepted wall values stay null until a responsible model/review task resolves them.

The proposed portal is 5.2 m wide; clear height 3.38 m. This is component geometry only, not player/door/collision approval. Upper unselected volumes are exterior representation. They have no commissioned furnished interior or working core yet.

## Defining identity and author decisions

- Rounded exterior and courtyard corners use six exact geometry segments per quadrant; no curvature is fabricated in a separate image.
- Peer correction: front wing reduced to two storeys while side/rear wings have four, plus small roof pavilions; this matches the visible relative hierarchy without claiming a measured floor count.
- Ground-front passage is proposed through both front wing walls; source does not prove door locations. Courtyard is unroofed and contains no pool.

## Next developer tasks

- Compare this candidate to its source card and approve/refine the proposed size, silhouette, front and entrance. Keep unseen-side choices visible.
- Coordinate selected lobby plus studio/workspace and shared lounge/conference room against a real core and usable clearances. Never stretch the shell to fit a generic room kit.
- Author facade joins, curved corners where required, UVs/PBR textures, glazing setup, drainage/root zones, foundations and maintainable detail.
- Independently verify shell/component intersections, full route/door interfaces and native Blender result before a build-ready claim. Engine import and final district placement are later evidence gates.

Source card: /production/files/cards/03_Low_Rise_and_Public_Global_IDs.png (issued artwork, not measured).
